With all dependencies taken care of, this enables building the Marvell mmp platform as part of ARCH_MULTIPLATFORM, along with other ARMv5 and ARMv7 platforms.
Signed-off-by: Arnd Bergmann <[email protected]> --- arch/arm/Kconfig | 16 ---------- arch/arm/mach-mmp/Kconfig | 36 ++++++++++++++++++----- arch/arm/mach-mmp/Makefile | 1 + arch/arm/mach-mmp/include/mach/uncompress.h | 45 ----------------------------- arch/arm/plat-pxa/Makefile | 1 + 5 files changed, 30 insertions(+), 69 deletions(-) delete mode 100644 arch/arm/mach-mmp/include/mach/uncompress.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1bceaec85900..bf9ab47fa14b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -527,22 +527,6 @@ config ARCH_ORION5X Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), Orion-2 (5281), Orion-1-90 (6183). -config ARCH_MMP - bool "Marvell PXA168/910/MMP2" - depends on MMU - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select GENERIC_ALLOCATOR - select GENERIC_CLOCKEVENTS - select GPIO_PXA - select IRQ_DOMAIN - select MULTI_IRQ_HANDLER - select PINCTRL - select PLAT_PXA - select SPARSE_IRQ - help - Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. - config ARCH_KS8695 bool "Micrel/Kendin KS8695" select ARCH_REQUIRE_GPIOLIB diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index fdbfadf00c84..4773fe1d8b3f 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,9 +1,24 @@ +menuconfig ARCH_MMP + bool "Marvell PXA168/910/MMP2" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB + select GENERIC_ALLOCATOR + select GENERIC_CLOCKEVENTS + select GPIO_PXA + select PINCTRL + select PLAT_PXA + help + Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. + if ARCH_MMP -menu "Marvell PXA168/910/MMP2 Implmentations" +menu "Marvell PXA168/910/MMP2 Implementations" + +if ATAGS config MACH_ASPENITE bool "Marvell's PXA168 Aspenite Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -11,6 +26,7 @@ config MACH_ASPENITE config MACH_ZYLONITE2 bool "Marvell's PXA168 Zylonite2 Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -18,6 +34,7 @@ config MACH_ZYLONITE2 config MACH_AVENGERS_LITE bool "Marvell's PXA168 Avengers Lite Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -25,6 +42,7 @@ config MACH_AVENGERS_LITE config MACH_TAVOREVB bool "Marvell's PXA910 TavorEVB Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA910 help Say 'Y' here if you want to support the Marvell PXA910-based @@ -32,6 +50,7 @@ config MACH_TAVOREVB config MACH_TTC_DKB bool "Marvell's PXA910 TavorEVB Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA910 help Say 'Y' here if you want to support the Marvell PXA910-based @@ -39,7 +58,7 @@ config MACH_TTC_DKB config MACH_BROWNSTONE bool "Marvell's Brownstone Development Platform" - depends on !CPU_MOHAWK + depends on ARCH_MULTI_V7 select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-based @@ -50,7 +69,7 @@ config MACH_BROWNSTONE config MACH_FLINT bool "Marvell's Flint Development Platform" - depends on !CPU_MOHAWK + depends on ARCH_MULTI_V7 select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-based @@ -61,7 +80,7 @@ config MACH_FLINT config MACH_MARVELL_JASPER bool "Marvell's Jasper Development Platform" - depends on !CPU_MOHAWK + depends on ARCH_MULTI_V7 select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-base @@ -72,6 +91,7 @@ config MACH_MARVELL_JASPER config MACH_TETON_BGA bool "Marvell's PXA168 Teton BGA Development Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -79,14 +99,16 @@ config MACH_TETON_BGA config MACH_GPLUGD bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" + depends on ARCH_MULTI_V5 select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based GuruPlug Display (gplugD) Board +endif config MACH_MMP_DT bool "Support MMP (ARMv5) platforms from device tree" - select USE_OF + depends on ARCH_MULTI_V5 select PINCTRL select PINCTRL_SINGLE select COMMON_CLK @@ -99,11 +121,9 @@ config MACH_MMP_DT config MACH_MMP2_DT bool "Support MMP2 (ARMv7) platforms from device tree" - depends on !CPU_MOHAWK - select USE_OF + depends on ARCH_MULTI_V7 select PINCTRL select PINCTRL_SINGLE - select COMMON_CLK select ARCH_HAS_RESET_CONTROLLER select CPU_PJ4 help diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 98f0f6388e44..7677ad5414e9 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -1,6 +1,7 @@ # # Makefile for Marvell's PXA168 processors line # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-pxa/include obj-y += common.o devices.o time.o diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h deleted file mode 100644 index 8890fa8fa771..000000000000 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/arm/mach-mmp/include/mach/uncompress.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/serial_reg.h> -#include <mach/addr-map.h> -#include <asm/mach-types.h> - -#define UART1_BASE (APB_PHYS_BASE + 0x36000) -#define UART2_BASE (APB_PHYS_BASE + 0x17000) -#define UART3_BASE (APB_PHYS_BASE + 0x18000) - -volatile unsigned long *UART; - -static inline void putc(char c) -{ - /* UART enabled? */ - if (!(UART[UART_IER] & UART_IER_UUE)) - return; - - while (!(UART[UART_LSR] & UART_LSR_THRE)) - barrier(); - - UART[UART_TX] = c; -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ - /* default to UART2 */ - UART = (unsigned long *)UART2_BASE; - - if (machine_is_avengers_lite()) - UART = (unsigned long *)UART3_BASE; -} diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index e507aebbef52..557b134db772 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -1,6 +1,7 @@ # # Makefile for code common across different PXA processor families # +ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include obj-$(CONFIG_ARCH_PXA) := dma.o -- 2.1.0.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
