Hi Thierry

Thanks for your feedback.


On 11/21/2015 12:07 AM, Thierry Reding wrote:
On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
add Synopsys DesignWare MIPI DSI host controller driver support.

Signed-off-by: Chris Zhong <z...@rock-chips.com>
---

Changes in v4:
eliminate some warnning

Changes in v3: None
Changes in v2: None

  drivers/gpu/drm/bridge/Kconfig       |   11 +
  drivers/gpu/drm/bridge/Makefile      |    1 +
  drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
  include/drm/bridge/dw_mipi_dsi.h     |   27 +
  4 files changed, 1095 insertions(+)
  create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
  create mode 100644 include/drm/bridge/dw_mipi_dsi.h


+struct dw_mipi_dsi {
+       struct mipi_dsi_host dsi_host;
+       struct drm_connector connector;
+       struct drm_encoder *encoder;
struct drm_bridge already has a pointer to an encoder, can't you reuse
that instead?

+       struct drm_bridge *bridge;
Typically you'd embed the bridge into the driver structure.
I'm almost done with all the modifications according to your comments.
Remaining this point I can not understand, the dsi is a pointer of drm_bridge,
hence I can not get the bridge by container_of.
Although, the "bridge->driver_private = dsi" have done in dw_mipi_dsi_register.


+       struct drm_panel *panel;
+       struct device *dev;
+
+       void __iomem *base;
+
+       struct clk *pllref_clk;
+       struct clk *cfg_clk;
+       struct clk *pclk;
+
+       unsigned int lane_mbps; /* per lane */
+       u32 channel;
+       u32 lanes;
+       u32 format;
+       u16 input_div;
+       u16 feedback_div;
+       struct drm_display_mode *mode;
+
+       const struct dw_mipi_dsi_plat_data *pdata;
+
+       bool enabled;
+};
+


Thierry


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to