Hi Sebastian and Andrew,
 
 On sam., nov. 28 2015, Andrew Lunn <[email protected]> wrote:

> On Sat, Nov 28, 2015 at 12:14:07PM +0100, Sebastian Hesselbarth wrote:
>> Prefix all partition reg properties to 32-bit to ease readability.
>> While at it, also remove a stale x in front of boot partition
>> offset and make some upper-case hex numbers lower-case.
>> 
>> Signed-off-by: Sebastian Hesselbarth <[email protected]>
>
> Acked-by: Andrew Lunn <[email protected]>

Applied on mvebu/dt

Thanks,

Gregory

>
>         Andrew
>
>> ---
>> Cc: Jason Cooper <[email protected]> 
>> Cc: Andrew Lunn <[email protected]>
>> Cc: Gregory Clement <[email protected]> 
>> Cc: Rob Herring <[email protected]> 
>> Cc: Pawel Moll <[email protected]> 
>> Cc: Mark Rutland <[email protected]> 
>> Cc: Ian Campbell <[email protected]> 
>> Cc: Kumar Gala <[email protected]> 
>> Cc: Russell King <[email protected]> 
>> Cc: Benoit Masson <[email protected]>
>> Cc: [email protected] 
>> Cc: [email protected] 
>> Cc: [email protected] 
>> ---
>>  arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 14 +++++++-------
>>  1 file changed, 7 insertions(+), 7 deletions(-)
>> 
>> diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts 
>> b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
>> index 76781fd18624..13cf69a8d0fb 100644
>> --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
>> +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
>> @@ -157,35 +157,35 @@
>>  
>>                                      partition@0 {
>>                                              label = "u-boot";
>> -                                            reg = <0x0000000 0xe0000>;
>> +                                            reg = <0x00000000 0x000e0000>;
>>                                              read-only;
>>                                      };
>>  
>>                                      partition@e0000 {
>>                                              label = "u-boot-env";
>> -                                            reg = <0xe0000 0x20000>;
>> +                                            reg = <0x000e0000 0x00020000>;
>>                                              read-only;
>>                                      };
>>  
>>                                      partition@100000 {
>>                                              label = "u-boot-env2";
>> -                                            reg = <0x100000 0x20000>;
>> +                                            reg = <0x00100000 0x00020000>;
>>                                              read-only;
>>                                      };
>>  
>>                                      partition@120000 {
>>                                              label = "zImage";
>> -                                            reg = <0x120000 0x400000>;
>> +                                            reg = <0x00120000 0x00400000>;
>>                                      };
>>  
>>                                      partition@520000 {
>>                                              label = "initrd";
>> -                                            reg = <0x520000 0x400000>;
>> +                                            reg = <0x00520000 0x00400000>;
>>                                      };
>>  
>> -                                    partition@xE00000 {
>> +                                    partition@e00000 {
>>                                              label = "boot";
>> -                                            reg = <0xE00000 0x3F200000>;
>> +                                            reg = <0x00e00000 0x3f200000>;
>>                                      };
>>                              };
>>                      };
>> -- 
>> 2.1.4
>> 

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to