Hi, since at least 2.6.18, my ISDN card has given me this error in dmesg:
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2 PPP BSD Compression module registered HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (kernel) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: Teles/PCI driver Rev. 2.23.2.3 ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 19 Found: Zoran, base-address: 0xdb800000, irq: 0x13 HiSax: Teles PCI config irq:19 mem:e084e000 TelesPCI: ISAC version (0): 2086/2186 V1.1 TelesPCI: HSCX version A: V2.1 B: V2.1 Teles PCI: IRQ 19 count 0 Teles PCI: IRQ 19 count 0 Teles PCI: IRQ(19) getting no interrupts during init 1 Teles PCI: IRQ 19 count 0 Teles PCI: IRQ(19) getting no interrupts during init 2 Teles PCI: IRQ 19 count 0 Teles PCI: IRQ(19) getting no interrupts during init 3 HiSax: Card Teles PCI not installed ! I also get this error when I boot with "acpi=off noapic", so I'm pretty sure it's a hisax bug, not an acpi/irq error. Anyone have an idea what's the problem here? Please cc me, as I'm not subscribed. Thanks. Best regards, Stian - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/