Hello. On 12/11/2015 12:28 AM, Simon Arlott wrote:
Add device tree binding for the BCM6345 soft reset controller. The BCM6345 contains a soft-reset controller activated by setting a bit (that must previously have been cleared). Signed-off-by: Simon Arlott <[email protected]> --- v3: Resend. Example has changed because usbh now has two compatible strings and uses a power domain instead of a regulator. v2: Renamed to bcm6345, removed "mask" property. Acked-by: Rob Herring <[email protected]> .../bindings/reset/brcm,bcm6345-reset.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt new file mode 100644 index 0000000..0313040 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt @@ -0,0 +1,33 @@ +Broadcom BCM6345 reset controller + +The BCM6345 contains a basic soft reset controller in the perf register +set which resets components using a bit in a register. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "brcm,bcm<soc>-reset", "brcm,bcm6345-reset" +- regmap: The register map phandle +- offset: Offset in the register map for the reset register (in bytes) +- #reset-cells: Must be set to 1 + +Example: + +periph_soft_rst: reset-controller { + compatible = "brcm,bcm63168-reset", "brcm,bcm6345-reset"; + regmap = <&periph_cntl>; + offset = <0x10>; + + #reset-cells = <1>; +}; + +usbh: usbphy@10002700 {
"usb-phy" please to be more in line with ePAPR standardized "ethernet-phy" node name.
[...] MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
