From: Cristian Birsan <cristian.bir...@microchip.com>
Document the devicetree bindings for the interrupt controller on
Microchip PIC32 class devices.
Signed-off-by: Cristian Birsan <cristian.bir...@microchip.com>
Signed-off-by: Joshua Henderson <joshua.hender...@microchip.com>
Cc: Ralf Baechle <r...@linux-mips.org>
---
.../interrupt-controller/microchip,pic32-evic.txt | 58 ++++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644
Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
diff --git
a/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
new file mode 100644
index 0000000..6f4389a
--- /dev/null
+++
b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
@@ -0,0 +1,58 @@
+Microchip PIC32 Interrupt Controller
+====================================
+
+The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller
+(EVIC). It handles internal and external interrupts and provides support for
+irq type and polarity.
+
+Required properties
+-------------------
+
+- compatible: Should be "microchip,pic32mzda-evic"
+
+- reg: Specifies physical base address and size of register range.
+
+- interrupt-controller: Identifies the node as an interrupt controller.
+
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+source connected to this controller. The value shall be 2 and interrupt
+descriptor shall have the following format:
+ <hw_irq irq_type>
+
+hw_irq - represents the hardware interrupt number as in the data sheet.
+
+irq_type - is used to describe the type and polarity of an interrupt. For
+internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
+IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
+IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
+
+Example
+-------
+
+evic: interrupt-controller@1f810000 {
+ compatible = "microchip,pic32mzda-evic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1f810000 0x1000>;
+};
+
+Each device must request his interrupt line with the associated priority and
+polarity
+
+Internal interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+ ...
+ interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
+ ...
+};
+
+External interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+ ...
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ ...
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
