For PCIe compliance, the PHY registers need setting as per the
manual.
Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com>
---
v2:
- Added comment about where the PHY settings come from.
---
drivers/pci/host/pcie-rcar.c | 31 ++++++++++++++++++++++++++++---
1 file changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 7e13fbb..12be16a 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -104,6 +104,11 @@
#define H1_PCIEPHYDOUTR 0x040014
#define H1_PCIEPHYSR 0x040018
+/* R-Car Gen2 PHY */
+#define GEN2_PCIEPHYADDR 0x780
+#define GEN2_PCIEPHYDATA 0x784
+#define GEN2_PCIEPHYCTRL 0x78c
+
#define INT_PCI_MSI_NR 32
#define RCONF(x) (PCICONF(0)+(x))
@@ -599,6 +604,26 @@ static int rcar_pcie_hw_init_h1(struct rcar_pcie *pcie)
return -ETIMEDOUT;
}
+static int rcar_pcie_hw_init_gen2(struct rcar_pcie *pcie)
+{
+ /*
+ * These settings come from the R-Car Series, 2nd Generation User's
+ * Manual, section 50.3.1 (2) Initialization of the physical layer.
+ */
+ rcar_pci_write_reg(pcie, 0x000f0030, GEN2_PCIEPHYADDR);
+ rcar_pci_write_reg(pcie, 0x00381203, GEN2_PCIEPHYDATA);
+ rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL);
+ rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL);
+
+ rcar_pci_write_reg(pcie, 0x000f0054, GEN2_PCIEPHYADDR);
+ /* The following value is for DC connection, no termination resistor */
+ rcar_pci_write_reg(pcie, 0x13802007, GEN2_PCIEPHYDATA);
+ rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL);
+ rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL);
+
+ return rcar_pcie_hw_init(pcie);
+}
+
static int rcar_msi_alloc(struct rcar_msi *chip)
{
int msi;
@@ -938,9 +963,9 @@ static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie
*pcie,
static const struct of_device_id rcar_pcie_of_match[] = {
{ .compatible = "renesas,pcie-r8a7779", .data = rcar_pcie_hw_init_h1 },
- { .compatible = "renesas,pcie-rcar-gen2", .data = rcar_pcie_hw_init },
- { .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init },
- { .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init },
+ { .compatible = "renesas,pcie-rcar-gen2", .data =
rcar_pcie_hw_init_gen2 },
+ { .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init_gen2
},
+ { .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init_gen2
},
{ .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init },
{},
};
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
