On Mon, Jan 18, 2016 at 06:04:08PM +0800, Wei Ni wrote: > Add hw-trips sub-node for soctherm, which is > used to describe the hardware trip points for > each soctherm sensors.
Please make use of the full 78 characters in each line. Otherwise looks good to me. Oh, also make sure to Cc: [email protected] on device tree binding patches. Doing that now, hence quoting verbatim. Thierry > > Signed-off-by: Wei Ni <[email protected]> > --- > .../devicetree/bindings/thermal/tegra-soctherm.txt | 24 > ++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt > b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt > index 6b68cd150405..75dc9dbe7e1a 100644 > --- a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt > +++ b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt > @@ -26,6 +26,15 @@ Required properties : > of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a > list of valid values when referring to thermal sensors. > > +Optional properties: > +- hw-trip-points : A sub-node which is a container of hardware trip points > + for each sensors. > + * sensors: Sub-nodes which are used to describe the HW trip points info, > + must be named as "cpu", "gpu", "mem", "pll". > + Properties: > + - thermtrip-temperature : Shutdown or reset temperature in > millicelsius, > + once the temperature of this sensor is higher than the > + thermtrip-temperature, the system will be shutdown or reset. > > Example : > > @@ -40,6 +49,21 @@ Example : > reset-names = "soctherm"; > > #thermal-sensor-cells = <1>; > + > + hw-trip-points { > + cpu { > + thermtrip-temperature = <103000>; > + }; > + gpu { > + thermtrip-temperature = <103500>; > + }; > + mem { > + thermtrip-temperature = <103500>; > + }; > + pll { > + thermtrip-temperature = <105000>; > + }; > + }; > }; > > Example: referring to thermal sensors : > -- > 1.9.1 >
signature.asc
Description: PGP signature
