Hi, On Tue, Feb 02, 2016 at 03:49:53PM +0100, [email protected] wrote: > From: Marcus Cooper <[email protected]> > > Add devicetree bindings for the SPDIF transceiver found on > found on Allwinners A10 and A20 SoCs. > > Signed-off-by: Marcus Cooper <[email protected]> > --- > .../devicetree/bindings/sound/sun4i,spdif.txt | 46 > ++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/sun4i,spdif.txt > > diff --git a/Documentation/devicetree/bindings/sound/sun4i,spdif.txt > b/Documentation/devicetree/bindings/sound/sun4i,spdif.txt > new file mode 100644 > index 0000000..55ed2f6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/sun4i,spdif.txt > @@ -0,0 +1,46 @@ > +Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller > + > +The Allwinner S/PDIF audio block is a transceiver that allows the > +processor to receive and transmit digital audio via an coaxial cable or > +a fibre cable. > + > +Required properties: > + > + - compatible : should be one of the following: > + - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC > + > + - reg : Offset and length of the register set for the > device. > + > + - interrupts : Contains the spdif interrupt. > + > + - dmas : Generic dma devicetree binding as described in > + Documentation/devicetree/bindings/dma/dma.txt. > + > + - dma-names : Two dmas have to be defined, "tx" and "rx". > + > + - clocks : Contains an entry for each entry in clock-names. > + > + - clock-names : Includes the following entries: > + "apb" clock for the spdif bus. > + "spdif" clock for spdif controller. > + > +Optional: > + > + - spdif-in : Enable block for capturing an SPDIF signal. > + > + - spdif-out : Enable block for transmitting an SPDIF signal.
Is that a generic property? What values can it hold? Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
signature.asc
Description: Digital signature
