The IPROC SDHCI driver works fine for SDIO 3.0 on NS2 so let's enable it for NS2 SoC in NS2 DT.
Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Vikram Prakash <[email protected]> Reviewed-by: Ray Jui <[email protected]> --- arch/arm64/boot/dts/broadcom/ns2-svk.dts | 4 ++++ arch/arm64/boot/dts/broadcom/ns2.dtsi | 18 ++++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index 6bb3d4d..3321bd1 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -64,6 +64,10 @@ status = "ok"; }; +&sdio0 { + status = "ok"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index a510d3a..b1f352d 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -291,6 +291,24 @@ reg = <0x66220000 0x28>; }; + sdio0: sdhci@66420000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x66420000 0x100>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; + status = "disabled"; + }; + + sdio1: sdhci@66430000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x66430000 0x100>; + interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; + status = "disabled"; + }; + nand: nand@66460000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x66460000 0x600>, -- 1.9.1
