Recent addition of SSC clock management does not check if clk_enable() succeed. The patch adds such checks where it is appropriate.
Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <[email protected]> --- sound/spi/at73c213.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index fac7e6eb9529..36cfaa316eab 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -221,7 +221,11 @@ static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream) runtime->hw = snd_at73c213_playback_hw; chip->substream = substream; - clk_enable(chip->ssc->clk); + err = clk_enable(chip->ssc->clk); + if (err < 0) { + chip->substream = NULL; + return err; + } return 0; } @@ -787,7 +791,9 @@ static int snd_at73c213_chip_init(struct snd_at73c213 *chip) goto out; /* Enable DAC master clock. */ - clk_enable(chip->board->dac_clk); + retval = clk_enable(chip->board->dac_clk); + if (retval) + goto out; /* Initialize at73c213 on SPI bus. */ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04); @@ -900,7 +906,9 @@ static int snd_at73c213_dev_init(struct snd_card *card, chip->card = card; chip->irq = -1; - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->ssc->clk); + if (retval) + return retval; retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip); if (retval) { @@ -1099,9 +1107,16 @@ static int snd_at73c213_resume(struct device *dev) { struct snd_card *card = dev_get_drvdata(dev); struct snd_at73c213 *chip = card->private_data; + int retval; - clk_enable(chip->board->dac_clk); - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->board->dac_clk); + if (retval) + return retval; + retval = clk_enable(chip->ssc->clk); + if (retval) { + clk_disable(chip->board->dac_clk); + return retval; + } ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN)); return 0; -- 1.9.1
