early console in setup code
[    0.000000] Linux version 4.5.0-rc2-00005-g868f2f0 (kbuild@athens) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #120 SMP PREEMPT Wed Feb 10 06:01:59 CST 2016
[    0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-yocto-x86_64-6/bisect_boot-1-yocto-minimal-x86_64.cgz-x86_64-acpi-redef-868f2f0b72068a097508b6e8870a8950fd8eb7ef-20160210-117061-da7x6h-2.yaml ARCH=x86_64 kconfig=x86_64-acpi-redef branch=linux-devel/devel-catchup-201602100400 commit=868f2f0b72068a097508b6e8870a8950fd8eb7ef BOOT_IMAGE=/pkg/linux/x86_64-acpi-redef/gcc-5/868f2f0b72068a097508b6e8870a8950fd8eb7ef/vmlinuz-4.5.0-rc2-00005-g868f2f0 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-acpi-redef/gcc-5/868f2f0b72068a097508b6e8870a8950fd8eb7ef/2 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-yocto-x86_64-6::dhcp drbd.minor_count=8
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6610-0x000f661f] mapped at [ffff8800000f6610]
[    0.000000]   mpc: f6620-f6714
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x034ca000, 0x034cafff] PGTABLE
[    0.000000] BRK [0x034cb000, 0x034cbfff] PGTABLE
[    0.000000] BRK [0x034cc000, 0x034ccfff] PGTABLE
[    0.000000] BRK [0x034cd000, 0x034cdfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x13aa9000-0x13fdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6400 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x0000000013FE1737 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x0000000013FE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x0000000013FE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x0000000013FE0000 000040
[    0.000000] ACPI: SSDT 0x0000000013FE0C88 0009F7 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x0000000013FE167F 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x0000000013FE16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13aa8001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 6310267658 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000013fdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000] On node 0 totalpages: 81790
[    0.000000]   DMA32 zone: 1280 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 81790 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 479 pages/cpu @ffff880012800000 s1929752 r0 d32232 u2097152
[    0.000000] pcpu-alloc: s1929752 r0 d32232 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1280d740
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 80489
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-yocto-x86_64-6/bisect_boot-1-yocto-minimal-x86_64.cgz-x86_64-acpi-redef-868f2f0b72068a097508b6e8870a8950fd8eb7ef-20160210-117061-da7x6h-2.yaml ARCH=x86_64 kconfig=x86_64-acpi-redef branch=linux-devel/devel-catchup-201602100400 commit=868f2f0b72068a097508b6e8870a8950fd8eb7ef BOOT_IMAGE=/pkg/linux/x86_64-acpi-redef/gcc-5/868f2f0b72068a097508b6e8870a8950fd8eb7ef/vmlinuz-4.5.0-rc2-00005-g868f2f0 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-acpi-redef/gcc-5/868f2f0b72068a097508b6e8870a8950fd8eb7ef/2 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-yocto-x86_64-6::dhcp drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 273208K/327160K available (12767K kernel code, 1494K rwdata, 5976K rodata, 2908K init, 12740K bss, 53952K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:4352 nr_irqs:440 16
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 8639 kB
[    0.000000]  per task-struct memory footprint: 2688 bytes
[    0.000000] ODEBUG: selftest passed
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2926.328 MHz processor
[    0.276158] Calibrating delay loop (skipped) preset value.. 5852.65 BogoMIPS (lpj=11705312)
[    0.278248] pid_max: default: 32768 minimum: 301
[    0.279671] ACPI: Core revision 20160108
[    0.289309] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.291292] 
[    0.291952] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.293922] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.296918] mce: CPU supports 10 MCE banks
[    0.298122] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.299700] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.302202] Freeing SMP alternatives memory: 40K (ffffffff8284e000 - ffffffff82858000)
[    0.315410] enabled ExtINT on CPU#0
[    0.318150] ENABLING IO-APIC IRQs
[    0.319086] init IO_APIC IRQs
[    0.319935]  apic 0 pin 0 not connected
[    0.321074] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.323435] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.325798] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.328129] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.330444] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.332697] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.334632] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.336541] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.338413] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.340337] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.342252] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.344236] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.346224] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.348463] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.350675] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.352973]  apic 0 pin 16 not connected
[    0.354144]  apic 0 pin 17 not connected
[    0.355342]  apic 0 pin 18 not connected
[    0.356555]  apic 0 pin 19 not connected
[    0.357809]  apic 0 pin 20 not connected
[    0.359085]  apic 0 pin 21 not connected
[    0.360330]  apic 0 pin 22 not connected
[    0.361546]  apic 0 pin 23 not connected
[    0.362967] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.365809] Using local APIC timer interrupts.
[    0.365809] calibrating APIC timer ...
[    0.474997] ... lapic delta = 6250291
[    0.476054] ... PM-Timer delta = 357969
[    0.477117] ... PM-Timer result ok
[    0.478051] ..... delta 6250291
[    0.478981] ..... mult: 268447954
[    0.479935] ..... calibration result: 4000186
[    0.481161] ..... CPU clock speed is 2926.1753 MHz.
[    0.482541] ..... host bus clock speed is 1000.0186 MHz.
[    0.484214] smpboot: CPU0: Intel Core i7 9xx (Nehalem Class Core i7) (family: 0x6, model: 0x1a, stepping: 0x3)
[    0.487326] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.
[    0.524258] x86: Booting SMP configuration:
[    0.525261] .... node  #0, CPUs:      #1
[    0.526373] kvm-clock: cpu 1, msr 0:13aa8041, secondary cpu clock
[    0.527948] masked ExtINT on CPU#1
[    0.549091] x86: Booted up 1 node, 2 CPUs
[    0.549096] KVM setup async PF for cpu 1
[    0.549101] kvm-stealtime: cpu 1, msr 12a0d740
[    0.552355] smpboot: Total of 2 processors activated (11705.31 BogoMIPS)
[    0.555360] devtmpfs: initialized
[    0.562527] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.565090] xor: measuring software checksum speed
[    0.604219]    prefetch64-sse:  5243.000 MB/sec
[    0.644218]    generic_sse:  4773.000 MB/sec
[    0.645307] xor: using function: prefetch64-sse (5243.000 MB/sec)
[    0.646767] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.649772] NET: Registered protocol family 16
[    0.664275] cpuidle: using governor ladder
[    0.667833] ACPI: bus type PCI registered
[    0.670202] PCI: Using configuration type 1 for base access
[    0.728759] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.796228] raid6: sse2x1   gen()  2441 MB/s
[    0.864240] raid6: sse2x1   xor()  1781 MB/s
[    0.932243] raid6: sse2x2   gen()  3060 MB/s
[    1.000236] raid6: sse2x2   xor()  2134 MB/s
[    1.068254] raid6: sse2x4   gen()  2640 MB/s
[    1.136256] raid6: sse2x4   xor()  1978 MB/s
[    1.137387] raid6: using algorithm sse2x2 gen() 3060 MB/s
[    1.138724] raid6: .... xor() 2134 MB/s, rmw enabled
[    1.139894] raid6: using ssse3x2 recovery algorithm
[    1.154711] ACPI: Added _OSI(Module Device)
[    1.155782] ACPI: Added _OSI(Processor Device)
[    1.156858] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.157982] ACPI: Added _OSI(Processor Aggregator Device)
[    1.166450] ACPI: Interpreter enabled
[    1.167356] ACPI: (supports S0 S5)
[    1.168197] ACPI: Using IOAPIC for interrupt routing
[    1.169568] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.191950] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.193553] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[    1.194986] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.198425] PCI host bridge to bus 0000:00
[    1.199443] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.201071] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.202707] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.204427] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window]
[    1.206206] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.207697] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    1.210524] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    1.213501] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    1.227055] pci 0000:00:01.1: reg 0x20: [io  0xc0c0-0xc0cf]
[    1.232283] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.233913] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.235389] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.237856] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.240067] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    1.242175] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.243785] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.246306] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    1.252341] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    1.263748] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    1.283915] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    1.286491] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    1.291816] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    1.297437] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    1.320136] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    1.322446] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    1.327542] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    1.332722] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    1.355051] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    1.359917] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
[    1.365622] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[    1.387683] pci 0000:00:06.0: [8086:25ab] type 00 class 0x088000
[    1.391709] pci 0000:00:06.0: reg 0x10: [mem 0xfebf3000-0xfebf300f]
[    1.406209] pci_bus 0000:00: on NUMA node 0
[    1.409148] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.411529] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.413354] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.415084] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.416543] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.419177] ACPI: Enabled 16 GPEs in block 00 to 0F
[    1.422418] SCSI subsystem initialized
[    1.423479] libata version 3.00 loaded.
[    1.424491] ACPI: bus type USB registered
[    1.425468] usbcore: registered new interface driver usbfs
[    1.426749] usbcore: registered new interface driver hub
[    1.440105] usbcore: registered new device driver usb
[    1.441505] Linux video capture interface: v2.00
[    1.442640] pps_core: LinuxPPS API ver. 1 registered
[    1.443689] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.445623] PTP clock support registered
[    1.446754] wmi: Mapper loaded
[    1.448005] Advanced Linux Sound Architecture Driver Initialized.
[    1.449534] PCI: Using ACPI for IRQ routing
[    1.450519] PCI: pci_cache_line_size set to 64 bytes
[    1.451911] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.453220] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff]
[    1.457264] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.458957] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.460195] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    1.469026] clocksource: Switched to clocksource kvm-clock
[    1.472006] pnp: PnP ACPI init
[    1.473172] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.474914] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.476570] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.478117] pnp 00:03: [dma 2]
[    1.478911] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.480553] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.482178] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.484655] pnp: PnP ACPI: found 6 devices
[    1.492547] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.494718] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.495993] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.497276] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.498733] pci_bus 0000:00: resource 7 [mem 0x14000000-0xfebfffff window]
[    1.500368] NET: Registered protocol family 2
[    1.502127] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.503775] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[    1.505415] TCP: Hash tables configured (established 4096 bind 4096)
[    1.507196] UDP hash table entries: 256 (order: 3, 49152 bytes)
[    1.508541] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[    1.510315] NET: Registered protocol family 1
[    1.511787] RPC: Registered named UNIX socket transport module.
[    1.513123] RPC: Registered udp transport module.
[    1.514135] RPC: Registered tcp transport module.
[    1.515173] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.516570] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.517933] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.519283] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.520777] pci 0000:00:02.0: Video device with shadowed ROM
[    1.522116] PCI: CLS 0 bytes, default 64
[    1.523288] Trying to unpack rootfs image as initramfs...
[    2.316423] Freeing initrd memory: 5340K (ffff880013aa9000 - ffff880013fe0000)
[    2.343946] cryptomgr_test (30) used greatest stack depth: 15032 bytes left
[    2.349256] AVX or AES-NI instructions are not detected.
[    2.350425] CPU feature 'AVX registers' is not supported.
[    2.351672] CPU feature 'AVX registers' is not supported.
[    2.352851] CPU feature 'AVX registers' is not supported.
[    2.355109] futex hash table entries: 512 (order: 4, 65536 bytes)
[    2.356954] audit: initializing netlink subsys (disabled)
[    2.373748] audit: type=2000 audit(1455055446.296:1): initialized
[    2.403197] NFS: Registering the id_resolver key type
[    2.404467] Key type id_resolver registered
[    2.405477] Key type id_legacy registered
[    2.407938] SGI XFS with security attributes, no debug enabled
[    2.412307] 9p: Installing v9fs 9p2000 file system support
[    2.415326] NILFS version 2 loaded
[    2.422572] Key type asymmetric registered
[    2.423852] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    2.425527] io scheduler noop registered (default)
[    2.426573] start plist test
[    2.430823] end plist test
[    2.443187] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1
[    2.444280] crc32: self tests passed, processed 225944 bytes in 5688512 nsec
[    2.451947] crc32c: CRC_LE_BITS = 1
[    2.452738] crc32c: self tests passed, processed 225944 bytes in 3030951 nsec
[    2.765499] crc32_combine: 8373 self tests passed
[    3.033092] crc32c_combine: 8373 self tests passed
[    3.034826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.036951] rivafb_setup START
[    3.038236] vmlfb: initializing
[    3.039486] usbcore: registered new interface driver udlfb
[    3.040937] usbcore: registered new interface driver smscufx
[    3.042504] intel_idle: does not run on family 6 model 26
[    3.044287] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    3.046275] ACPI: Power Button [PWRF]
[    3.317165] tsc: Refined TSC clocksource calibration: 2926.331 MHz
[    3.318600] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2e6d0c843, max_idle_ns: 440795203682 ns
[    3.381915] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    3.382761] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[    3.675593] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    3.677406] virtio-pci 0000:00:05.0: virtio_pci: leaving for legacy driver
[    3.744505] r3964: Philips r3964 Driver $Revision: 1.10 $
[    3.746276] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.779942] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.783190] Initializing Nozomi driver 2.1d
[    3.784263] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    3.785907] ac.o: No PCI boards found.
[    3.786851] ac.o: For an ISA board you must supply memory and irq parameters.
[    3.789050] Non-volatile memory driver v1.3
[    3.790524] Linux agpgart interface v0.103
[    3.791974] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    3.794491] [drm] Initialized drm 1.1.0 20060810
[    3.856120] brd: module loaded
[    4.267401] mtip32xx Version 1.3.1
[    4.268387] Phantom Linux Driver, version n0.9.8, init OK
[    4.270483] usbcore: registered new interface driver viperboard
[    4.271828] Uniform Multi-Platform E-IDE driver
[    4.273524] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    4.275060] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    4.278088]     ide0: BM-DMA at 0xc0c0-0xc0c7
[    4.279039]     ide1: BM-DMA at 0xc0c8-0xc0cf
[    4.279971] Probing IDE interface ide0...
[    4.853348] Probing IDE interface ide1...
[    5.637163] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[    6.349207] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[    6.350154] hdc: MWDMA2 mode selected
[    6.350825] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    6.351488] ide1 at 0x170-0x177,0x376 on irq 15
[    6.353309] ide-gd driver 1.18
[    6.353909] Loading iSCSI transport class v2.0-870.
[    6.371546] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17a
[    6.372285] fnic: Successfully Initialized Trace Buffer
[    6.373067] fnic: Successfully Initialized FC_CTLR Trace Buffer
[    6.377770] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    6.378833] Detecting Adaptec I2O RAID controllers...
[    6.379791] Adaptec aacraid driver 1.2-1[41010]-ms
[    6.381188] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
[    6.382815] csiostor: Chelsio FCoE driver 1.0.0
[    6.384012] megasas: 06.808.16.00-rc1
[    6.384904] mpt3sas version 09.102.00.00 loaded
[    6.386211] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    6.387823] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015)
[    6.389653] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[    6.391592] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[    6.393270] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[    6.394678] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015)
[    6.396033] iscsi: registered transport (cxgb3i)
[    6.396970] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015)
[    6.398335] iscsi: registered transport (cxgb4i)
[    6.399290] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[    6.400765] iscsi: registered transport (bnx2i)
[    6.408870] iscsi: registered transport (be2iscsi)
[    6.410092] In beiscsi_module_init, tt=ffffffff824b0dc0
[    6.412002] Error: Driver 'pata_platform' is already registered, aborting...
[    6.413960] SSFDC read-only Flash Translation layer
[    6.415194] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[    6.417055] device id = 2440
[    6.417641] device id = 2480
[    6.418308] device id = 24c0
[    6.419005] device id = 24d0
[    6.419681] device id = 25a1
[    6.420328] device id = 2670
[    6.421209] slram: not enough parameters.
[    6.423217] ftl_cs: FTL header not found.
[    6.425095] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    6.435275] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[    6.439199] libphy: Fixed MDIO Bus: probed
[    6.440585] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    6.441933] Copyright (c) 2007 Atheros Corporation.
[    6.443388] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[    6.445344] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.447041] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.729063] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    7.118956] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    7.119852] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    7.120736] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    7.121476] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.122287] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[    7.123208] igb: Copyright (c) 2007-2014 Intel Corporation.
[    7.124005] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[    7.124978] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[    7.130164] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.63
[    7.131245] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[    7.131977] tehuti: Options: hw_csum 
[    7.132611] usbcore: registered new interface driver catc
[    7.133360] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    7.134371] usbcore: registered new interface driver pegasus
[    7.135140] usbcore: registered new interface driver ipheth
[    7.136779] aoe: AoE v85 initialised.
[    7.137962] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.139363] ohci-pci: OHCI PCI platform driver
[    7.141594] ohci-platform: OHCI generic platform driver
[    7.144225] usbcore: registered new interface driver cdc_acm
[    7.156707] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    7.158669] usbcore: registered new interface driver usblp
[    7.161739] usbcore: registered new interface driver cdc_wdm
[    7.163196] usbcore: registered new interface driver usb-storage
[    7.164612] usbcore: registered new interface driver ums-alauda
[    7.166019] usbcore: registered new interface driver ums-datafab
[    7.167431] usbcore: registered new interface driver ums-freecom
[    7.169113] usbcore: registered new interface driver ums-jumpshot
[    7.170706] usbcore: registered new interface driver ums-realtek
[    7.172218] usbcore: registered new interface driver ums-sddr55
[    7.173646] usbcore: registered new interface driver mdc800
[    7.174920] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    7.177340] usbcore: registered new interface driver cypress_cy7c63
[    7.178778] usbcore: registered new interface driver emi62 - firmware loader
[    7.180284] usbcore: registered new interface driver iowarrior
[    7.181685] usbcore: registered new interface driver usblcd
[    7.182979] usbcore: registered new interface driver rio500
[    7.184394] usbcore: registered new interface driver usbtest
[    7.185794] usbcore: registered new interface driver usbsevseg
[    7.187861] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    7.189660] dummy_hcd dummy_hcd.0: Dummy host controller
[    7.191175] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    7.193497] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.195078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.196764] usb usb1: Product: Dummy host controller
[    7.198005] usb usb1: Manufacturer: Linux 4.5.0-rc2-00005-g868f2f0 dummy_hcd
[    7.199948] usb usb1: SerialNumber: dummy_hcd.0
[    7.203436] hub 1-0:1.0: USB hub found
[    7.204399] hub 1-0:1.0: 1 port detected
[    7.208187] Mass Storage Function, version: 2009/09/11
[    7.210044] LUN: removable file: (no medium)
[    7.210955] no file given for LUN0
[    7.212414] g_acm_ms dummy_udc.0: failed to start g_acm_ms: -22
[    7.218833] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    7.222285] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.223617] serio: i8042 AUX port at 0x60,0x64 irq 12
[    7.226370] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    7.245089] usbcore: registered new interface driver bcm5974
[    7.247261] usbcore: registered new interface driver synaptics_usb
[    7.248650] usbcore: registered new interface driver gtco
[    7.249930] usbcore: registered new interface driver hanwang
[    7.251436] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[    7.252795] usbcore: registered new interface driver ati_remote2
[    7.254094] cm109: Keymap for Komunikate KIP1000 phone loaded
[    7.261495] usbcore: registered new interface driver cm109
[    7.262299] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    7.266379] i2c-parport-light: adapter type unspecified
[    7.277746] IR NEC protocol handler initialized
[    7.278795] IR SANYO protocol handler initialized
[    7.279853] IR Sharp protocol handler initialized
[    7.280960] IR XMP protocol handler initialized
[    7.282253] usbcore: registered new interface driver imon
[    7.283677] usbcore: registered new interface driver mceusb
[    7.285247] Registered IR keymap rc-empty
[    7.286468] input: rc-core loopback device as /devices/virtual/rc/rc0/input4
[    7.288249] rc rc0: rc-core loopback device as /devices/virtual/rc/rc0
[    7.290092] pps_ldisc: PPS line discipline registered
[    7.291394] Driver for 1-wire Dallas network protocol.
[    7.292842] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[    7.294279] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[    7.297468] applesmc: supported laptop not found!
[    7.298685] applesmc: driver init failed (ret=-19)!
[    7.302827] acquirewdt: WDT driver for Acquire single board computer initialising
[    7.304827] acquirewdt: I/O address 0x0043 already in use
[    7.306200] acquirewdt: probe of acquirewdt failed with error -5
[    7.307827] ib700wdt: WDT driver for IB700 single board computer initialising
[    7.310074] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[    7.311908] wafer5823wdt: I/O address 0x0443 already in use
[    7.312747] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.313627] sc1200wdt: build 20020303
[    7.314464] sc1200wdt: io parameter must be specified
[    7.315340] cpu5wdt: misc_register failed
[    7.315987] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[    7.318263] smsc37b787_wdt: Unable to register miscdev on minor 130
[    7.319202] machzwd: MachZ ZF-Logic Watchdog driver initializing
[    7.320120] machzwd: no ZF-Logic found
[    7.321591] ashmem: initialized
[    7.322328] acer_wmi: Acer Laptop ACPI-WMI Extras
[    7.323089] acer_wmi: No or unsupported WMI interface, unable to load
[    7.324154] fujitsu_tablet: Unknown (using defaults)
[    7.324991] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
[    7.328460] usbcore: registered new interface driver snd-usb-audio
[    7.329509] usbcore: registered new interface driver snd-ua101
[    7.330407] usbcore: registered new interface driver snd-usb-us122l
[    7.331367] usbcore: registered new interface driver snd-usb-caiaq
[    7.332611] Netfilter messages via NETLINK v0.30.
[    7.333387] nfnl_acct: registering with nfnetlink.
[    7.334278] xt_time: kernel timezone is -0000
[    7.334931] ip_set: protocol 6
[    7.335432] IPVS: Registered protocols (ESP)
[    7.336130] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    7.337736] IPVS: Each connection entry needs 408 bytes at least
[    7.339314] IPVS: Creating netns size=2168 id=0
[    7.340431] IPVS: ipvs loaded.
[    7.341177] IPVS: [lc] scheduler registered.
[    7.342134] IPVS: [wlc] scheduler registered.
[    7.343115] IPVS: [lblc] scheduler registered.
[    7.344115] IPVS: [dh] scheduler registered.
[    7.345077] IPVS: [sed] scheduler registered.
[    7.346125] ipip: IPv4 over IPv4 tunneling driver
[    7.347837] Initializing XFRM netlink socket
[    7.349013] 9pnet: Installing 9P2000 support
[    7.350205] NET: Registered protocol family 37
[    7.351334] Key type dns_resolver registered
[    7.352440] Key type ceph registered
[    7.354164] libceph: loaded (mon/osd proto 15/24)
[    7.358503] ... APIC ID:      00000000 (0)
[    7.359461] ... APIC VERSION: 01050014
[    7.360295] 0000000000000000000000000000000000000000000000000000000000000000
[    7.362019] 0000000000000000000000000000000000000000000000000000000000000000
[    7.363851] 0000000000000000000000000000000000000000000000000000000000008000
[    7.365709] 
[    7.366044] number of MP IRQ sources: 15.
[    7.366844] number of IO-APIC #0 registers: 24.
[    7.367781] testing the IO APIC.......................
[    7.368992] IO APIC #0......
[    7.369635] .... register #00: 00000000
[    7.370440] .......    : physical APIC id: 00
[    7.371354] .......    : Delivery Type: 0
[    7.372307] .......    : LTS          : 0
[    7.373177] .... register #01: 00170011
[    7.374057] .......     : max redirection entries: 17
[    7.375206] .......     : PRQ implemented: 0
[    7.376434] .......     : IO APIC version: 11
[    7.377395] .... register #02: 00000000
[    7.378264] .......     : arbitration: 00
[    7.379153] .... IRQ redirection table:
[    7.380019] IOAPIC 0:
[    7.380569]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.382376]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(03), M(1)
[    7.384280]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(03), M(1)
[    7.386072]  pin03, enabled , edge , high, V(33), IRR(0), S(0), logical , D(03), M(1)
[    7.387960]  pin04, disabled, edge , high, V(34), IRR(0), S(0), logical , D(03), M(1)
[    7.389902]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(03), M(1)
[    7.391659]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(03), M(1)
[    7.393413]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(03), M(1)
[    7.395180]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(03), M(1)
[    7.397087]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(03), M(1)
[    7.398821]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(03), M(1)
[    7.400807]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(03), M(1)
[    7.402594]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(03), M(1)
[    7.404374]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(03), M(1)
[    7.406151]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(03), M(1)
[    7.407926]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(03), M(1)
[    7.409825]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.411845]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.413983]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.416111]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.417918]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.419651]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.421430]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.423196]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    7.425214] IRQ to pin mappings:
[    7.425947] IRQ0 -> 0:2
[    7.426570] IRQ1 -> 0:1
[    7.427177] IRQ3 -> 0:3
[    7.427805] IRQ4 -> 0:4
[    7.428523] IRQ5 -> 0:5
[    7.429174] IRQ6 -> 0:6
[    7.429795] IRQ7 -> 0:7
[    7.430415] IRQ8 -> 0:8
[    7.431048] IRQ9 -> 0:9
[    7.431678] IRQ10 -> 0:10
[    7.432320] IRQ11 -> 0:11
[    7.432985] IRQ12 -> 0:12
[    7.433648] IRQ13 -> 0:13
[    7.434307] IRQ14 -> 0:14
[    7.434978] IRQ15 -> 0:15
[    7.435769] .................................... done.
[    7.438058] registered taskstats version 1
[    7.445924] Btrfs loaded
[    7.454933] Key type trusted registered
[    7.454935] cryptomgr_probe (139) used greatest stack depth: 14344 bytes left
[    7.458165] Key type encrypted registered
[    7.728153] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    9.465712] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[    9.489901] Sending DHCP requests ., OK
[   10.509121] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[   10.520747] IP-Config: Complete:
[   10.521599]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[   10.524299]      host=vm-intel12-yocto-x86_64-6, domain=, nis-domain=(none)
[   10.526231]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[   10.528314] ALSA device list:
[   10.538692]   No soundcards found.
[   10.553088] Freeing unused kernel memory: 2908K (ffffffff82577000 - ffffffff8284e000)
[   10.555193] Write protecting the kernel read-only data: 20480k
[   10.569779] Freeing unused kernel memory: 1556K (ffff880001c7b000 - ffff880001e00000)
[   10.573600] Freeing unused kernel memory: 168K (ffff8800023d6000 - ffff880002400000)
[   10.606172] mount (149) used greatest stack depth: 14264 bytes left
/etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: not found

Please wait: booting...
[   10.645846] mount (159) used greatest stack depth: 14184 bytes left
Starting udev
[   10.685723] pidof (165) used greatest stack depth: 14016 bytes left
[   11.087599] logger (465) used greatest stack depth: 13944 bytes left
[   11.182853] UDF-fs: warning (device vdb): udf_fill_super: No partition found (2)
[   11.196223] INFO: trying to register non-static key.
[   11.197332] the code is fine but needs lockdep annotation.
[   11.198502] turning off the locking correctness validator.
[   11.199679] CPU: 0 PID: 515 Comm: mount Not tainted 4.5.0-rc2-00005-g868f2f0 #120
[   11.201365] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   11.203331]  0000000000000000 ffff88000dd2fa78 ffffffff813eeaf0 0000000000000000
[   11.205100]  ffff88000dd2fae0 ffffffff810ad496 ffffffff81039aa5 ffff88000dd2faa0
[   11.206961]  0000000181039acb 0000000000000000 00000000000002d0 0000000000000000
[   11.209175] Call Trace:
[   11.209603] UDF-fs: warning (device vda): udf_fill_super: No partition found (2)
[   11.211190]  [<ffffffff813eeaf0>] dump_stack+0x4b/0x6c
[   11.212236]  [<ffffffff810ad496>] __lock_acquire+0x77d/0xc27
[   11.213652]  [<ffffffff81039aa5>] ? kvm_clock_read+0x25/0x37
[   11.214883]  [<ffffffff810ae0e6>] lock_acquire+0x53/0x76
[   11.216006]  [<ffffffff813d9fe0>] ? blk_insert_flush+0x182/0x1c5
[   11.217275]  [<ffffffff81c73513>] _raw_spin_lock_irq+0x36/0x6c
[   11.218510]  [<ffffffff813d9fe0>] ? blk_insert_flush+0x182/0x1c5
[   11.219888]  [<ffffffff813d9fe0>] blk_insert_flush+0x182/0x1c5
[   11.221326]  [<ffffffff813e01cb>] blk_sq_make_request+0xf7/0x23c
[   11.222698]  [<ffffffff813d674f>] generic_make_request+0xb8/0x156
[   11.224165]  [<ffffffff813d68d8>] submit_bio+0xeb/0xf6
[   11.225321]  [<ffffffff810a6dc1>] ? __init_waitqueue_head+0x36/0x49
[   11.226738]  [<ffffffff813d1e67>] submit_bio_wait+0x4f/0x65
[   11.228201]  [<ffffffff813da080>] blkdev_issue_flush+0x5d/0x7f
[   11.229617]  [<ffffffff812cd1bd>] xfs_blkdev_issue_flush+0x14/0x16
[   11.230991]  [<ffffffff812b9621>] xfs_free_buftarg+0x35/0x42
[   11.232279]  [<ffffffff812cbd1e>] xfs_close_devices+0x5f/0x64
[   11.233489]  [<ffffffff812ccca4>] xfs_fs_fill_super+0x318/0x4e3
[   11.234769]  [<ffffffff81156bbe>] mount_bdev+0x13e/0x193
[   11.235889]  [<ffffffff812cc98c>] ? xfs_parseargs+0x8bd/0x8bd
[   11.237107]  [<ffffffff812cb317>] xfs_fs_mount+0x10/0x12
[   11.238223]  [<ffffffff81156db0>] mount_fs+0xf/0x87
[   11.239245]  [<ffffffff8116eee9>] vfs_kern_mount+0x65/0x138
[   11.240484]  [<ffffffff81170de1>] do_mount+0xa1c/0xba6
[   11.241644]  [<ffffffff8111233e>] ? strndup_user+0x3a/0x54
[   11.242866]  [<ffffffff81171173>] SyS_mount+0x72/0x9a
[   11.244163]  [<ffffffff81c73f76>] entry_SYSCALL_64_fastpath+0x16/0x7a
[   11.259529] NILFS: Can't find nilfs on dev vdb.
[   11.260517] mount (515) used greatest stack depth: 13432 bytes left
[   11.268502] NILFS: Can't find nilfs on dev vda.
Kernel tests: Boot OK!
Sending all processes the KILL signal...
Unmounting remote filesystems...
Deactivating swap...
Unmounting local filesystems...
Rebooting... 
[   80.184617] Unregister pv shared memory for cpu 1
[   80.185665] Unregister pv shared memory for cpu 0
[   80.186848] no ifx modem active;
[   80.443221] reboot: Restarting system
[   80.443716] reboot: machine restart

Elapsed time: 90
qemu-system-x86_64 -enable-kvm -cpu Nehalem -kernel /pkg/linux/x86_64-acpi-redef/gcc-5/868f2f0b72068a097508b6e8870a8950fd8eb7ef/vmlinuz-4.5.0-rc2-00005-g868f2f0 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-yocto-x86_64-6/bisect_boot-1-yocto-minimal-x86_64.cgz-x86_64-acpi-redef-868f2f0b72068a097508b6e8870a8950fd8eb7ef-20160210-117061-da7x6h-2.yaml ARCH=x86_64 kconfig=x86_64-acpi-redef branch=linux-devel/devel-catchup-201602100400 commit=868f2f0b72068a097508b6e8870a8950fd8eb7ef BOOT_IMAGE=/pkg/linux/x86_64-acpi-redef/gcc-5/868f2f0b72068a097508b6e8870a8950fd8eb7ef/vmlinuz-4.5.0-rc2-00005-g868f2f0 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-acpi-redef/gcc-5/868f2f0b72068a097508b6e8870a8950fd8eb7ef/2 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-yocto-x86_64-6::dhcp drbd.minor_count=8'  -initrd /fs/KVM/initrd-vm-intel12-yocto-x86_64-6 -m 320 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/KVM/disk0-vm-intel12-yocto-x86_64-6,media=disk,if=virtio -drive file=/fs/KVM/disk1-vm-intel12-yocto-x86_64-6,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-intel12-yocto-x86_64-6 -serial file:/dev/shm/kboot/serial-vm-intel12-yocto-x86_64-6 -daemonize -display none -monitor null 
