On Fri, Feb 05, 2016 at 02:25:42PM +0800, qiujiang wrote:
> This patch modifies the DesignWare GPIO controller driver to
> support the GPIO-signaled ACPI Events. This is used for power
> button function on ARM server.
> 
> To make it work, the _AEI and _EVT object must be defined in
> the corresponding GPIO driver's dsdt table in UEFI. At the same
> time, ACPI daemon component is also necessary.

In general ACPI parts look ok to me. I would like to see ACPI DSDT table
entry for this device though.

There are few minor comments below.

> Signed-off-by: qiujiang <[email protected]>
> ---
>  drivers/gpio/gpio-dwapb.c                | 75 
> ++++++++++++++++++++------------
>  include/linux/platform_data/gpio-dwapb.h |  2 +-
>  2 files changed, 49 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
> index fcd5b0a..bfed2e9 100644
> --- a/drivers/gpio/gpio-dwapb.c
> +++ b/drivers/gpio/gpio-dwapb.c
> @@ -23,6 +23,11 @@
>  #include <linux/spinlock.h>
>  #include <linux/platform_data/gpio-dwapb.h>
>  #include <linux/slab.h>
> +#include <linux/acpi.h>
> +#include <linux/gpio.h>
> +
> +#include "gpiolib.h"
> +
>  
>  #define GPIO_SWPORTA_DR              0x00
>  #define GPIO_SWPORTA_DDR     0x04
> @@ -296,14 +301,14 @@ static void dwapb_configure_irqs(struct dwapb_gpio 
> *gpio,
>                                struct dwapb_port_property *pp)
>  {
>       struct gpio_chip *gc = &port->bgc.gc;
> -     struct device_node *node = pp->node;
> +     struct fwnode_handle  *fwnode = pp->fwnode;
>       struct irq_chip_generic *irq_gc = NULL;
>       unsigned int hwirq, ngpio = gc->ngpio;
>       struct irq_chip_type *ct;
>       int err, i;
>  
> -     gpio->domain = irq_domain_add_linear(node, ngpio,
> -                                          &irq_generic_chip_ops, gpio);
> +     gpio->domain = irq_domain_create_linear(fwnode,
> +                             ngpio, &irq_generic_chip_ops, gpio);
>       if (!gpio->domain)
>               return;
>  
> @@ -421,7 +426,7 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
>       }
>  
>  #ifdef CONFIG_OF_GPIO
> -     port->bgc.gc.of_node = pp->node;
> +     port->bgc.gc.of_node = to_of_node(pp->fwnode);
>  #endif
>       port->bgc.gc.ngpio = pp->ngpio;
>       port->bgc.gc.base = pp->gpio_base;
> @@ -440,6 +445,10 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
>       else
>               port->is_registered = true;
>  
> +     /* Add GPIO-signaled ACPI event support */
> +     if (pp->irq)
> +             acpi_gpiochip_request_interrupts(&(port->bgc.gc));
> +
>       return err;
>  }
>  
> @@ -453,19 +462,15 @@ static void dwapb_gpio_unregister(struct dwapb_gpio 
> *gpio)
>  }
>  
>  static struct dwapb_platform_data *
> -dwapb_gpio_get_pdata_of(struct device *dev)
> +dwapb_gpio_get_pdata(struct device *dev)
>  {
> -     struct device_node *node, *port_np;
> +     struct fwnode_handle *fwnode;
>       struct dwapb_platform_data *pdata;
>       struct dwapb_port_property *pp;
>       int nports;
>       int i;
>  
> -     node = dev->of_node;
> -     if (!IS_ENABLED(CONFIG_OF_GPIO) || !node)
> -             return ERR_PTR(-ENODEV);
> -
> -     nports = of_get_child_count(node);
> +     nports = device_get_child_node_count(dev);
>       if (nports == 0)
>               return ERR_PTR(-ENODEV);
>  
> @@ -480,21 +485,19 @@ dwapb_gpio_get_pdata_of(struct device *dev)
>       pdata->nports = nports;
>  
>       i = 0;
> -     for_each_child_of_node(node, port_np) {
> -             pp = &pdata->properties[i++];
> -             pp->node = port_np;
> +     device_for_each_child_node(dev, fwnode) {
> +             pp = &pdata->properties[i];
> +             pp->fwnode = fwnode;
>  
> -             if (of_property_read_u32(port_np, "reg", &pp->idx) ||
> +             if (fwnode_property_read_u32(fwnode, "reg", &pp->idx) ||
>                   pp->idx >= DWAPB_MAX_PORTS) {
> -                     dev_err(dev, "missing/invalid port index for %s\n",
> -                             port_np->full_name);
> +                     dev_err(dev, "missing/invalid port index\n");
>                       return ERR_PTR(-EINVAL);
>               }
>  
> -             if (of_property_read_u32(port_np, "snps,nr-gpios",
> +             if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
>                                        &pp->ngpio)) {
> -                     dev_info(dev, "failed to get number of gpios for %s\n",
> -                              port_np->full_name);
> +                     dev_info(dev, "failed to get number of gpios\n");
>                       pp->ngpio = 32;
>               }
>  
> @@ -502,18 +505,27 @@ dwapb_gpio_get_pdata_of(struct device *dev)
>                * Only port A can provide interrupts in all configurations of
>                * the IP.
>                */
> -             if (pp->idx == 0 &&
> -                 of_property_read_bool(port_np, "interrupt-controller")) {
> -                     pp->irq = irq_of_parse_and_map(port_np, 0);
> +              if (dev->of_node && pp->idx == 0 &&
> +                      of_property_read_bool(to_of_node(fwnode),
> +                      "interrupt-controller")) {
> +                     pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
>                       if (!pp->irq) {
> -                             dev_warn(dev, "no irq for bank %s\n",
> -                                      port_np->full_name);
> +                     dev_warn(dev, "no irq for bank %s\n",
> +                               to_of_node(fwnode)->full_name);
>                       }
>               }
>  
> +             if (ACPI_COMPANION(dev) && pp->idx == 0)

You can also use has_acpi_companion(dev) here.

> +                     pp->irq = platform_get_irq(to_platform_device(dev), 0);
> +
>               pp->irq_shared  = false;
>               pp->gpio_base   = -1;
> -             pp->name        = port_np->full_name;
> +
> +             if (dev->of_node)
> +                     pp->name = to_of_node(fwnode)->full_name;
> +
> +             if (ACPI_COMPANION(dev))
> +                     pp->name = acpi_dev_name(to_acpi_device_node(fwnode));
>       }
>  
>       return pdata;
> @@ -529,7 +541,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
>       struct dwapb_platform_data *pdata = dev_get_platdata(dev);
>  
>       if (!pdata) {
> -             pdata = dwapb_gpio_get_pdata_of(dev);
> +             pdata = dwapb_gpio_get_pdata(dev);
>               if (IS_ERR(pdata))
>                       return PTR_ERR(pdata);
>       }
> @@ -559,6 +571,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
>               if (err)
>                       goto out_unregister;
>       }
> +

Unrelated whitespace change.

>       platform_set_drvdata(pdev, gpio);
>  
>       return 0;
> @@ -586,6 +599,13 @@ static const struct of_device_id dwapb_of_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, dwapb_of_match);
>  
> +static const struct acpi_device_id dwapb_acpi_match[] = {
> +             {"HISI0181", 0},

Too many tabs.

> +             { }
> +};
> +MODULE_DEVICE_TABLE(acpi, dwapb_acpi_match);
> +
> +
>  #ifdef CONFIG_PM_SLEEP
>  static int dwapb_gpio_suspend(struct device *dev)
>  {
> @@ -680,6 +700,7 @@ static struct platform_driver dwapb_gpio_driver = {
>               .name   = "gpio-dwapb",
>               .pm     = &dwapb_gpio_pm_ops,
>               .of_match_table = of_match_ptr(dwapb_of_match),
> +             .acpi_match_table = ACPI_PTR(dwapb_acpi_match),
>       },
>       .probe          = dwapb_gpio_probe,
>       .remove         = dwapb_gpio_remove,
> diff --git a/include/linux/platform_data/gpio-dwapb.h 
> b/include/linux/platform_data/gpio-dwapb.h
> index 28702c8..c5bd1f2 100644
> --- a/include/linux/platform_data/gpio-dwapb.h
> +++ b/include/linux/platform_data/gpio-dwapb.h
> @@ -15,7 +15,7 @@
>  #define GPIO_DW_APB_H
>  
>  struct dwapb_port_property {
> -     struct device_node *node;
> +     struct fwnode_handle *fwnode;
>       const char      *name;
>       unsigned int    idx;
>       unsigned int    ngpio;
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to