[PATCH v2 3/3] ARM: dts: vf-colibri: add carrier boards 3.3V supply

[Stefan Agner]

Add the carrier boards 3.3V supply as fixed regulator. This allows
to specify the power supply for nodes like backlight.

Signed-off-by: Stefan Agner <ste...@agner.ch>
---
 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi 
b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index ca061c9..f9598b8 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -50,6 +50,14 @@
                clock-frequency = <16000000>;
        };
 
+       reg_3v3: regulator-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+       };
+
        reg_5v0: regulator-5v0 {
                compatible = "regulator-fixed";
                regulator-name = "5V";
@@ -73,6 +81,7 @@
 &bl {
        brightness-levels = <0 4 8 16 32 64 128 255>;
        default-brightness-level = <6>;
+       power-supply = <&reg_3v3>;
        status  = "okay";
 };
 
@@ -123,6 +132,10 @@
        status = "okay";
 };
 
+&reg_module_3v3 {
+       vin-supply = <&reg_3v3>;
+};
+
 &uart0 {
        status = "okay";
 };
-- 
2.7.1