This fixes the following checkpatch warning:
        * WARNING: Comparisons should place the constant
          on the right side of the test

Signed-off-by: Daniel Baluta <[email protected]>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 6 +++---
 drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c 
b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 84e014c..c550ebb 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -84,7 +84,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, 
bool en, u32 mask)
         * clock source be switched to gyro. Otherwise, it must be set to
         * internal clock
         */
-       if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
+       if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
                result = regmap_read(st->map, st->reg->pwr_mgmt_1, &mgmt_1);
                if (result)
                        return result;
@@ -92,7 +92,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, 
bool en, u32 mask)
                mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK;
        }
 
-       if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) {
+       if ((mask == INV_MPU6050_BIT_PWR_GYRO_STBY) && (!en)) {
                /*
                 * turning off gyro requires switch to internal clock first.
                 * Then turn off gyro engine
@@ -117,7 +117,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, 
bool en, u32 mask)
        if (en) {
                /* Wait for output stabilize */
                msleep(INV_MPU6050_TEMP_UP_TIME);
-               if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
+               if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
                        /* switch internal clock to PLL */
                        mgmt_1 |= INV_CLK_PLL;
                        result = regmap_write(st->map,
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c 
b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 1fc5fd9..441080b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -168,7 +168,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 
                result = kfifo_out(&st->timestamps, &timestamp, 1);
                /* when there is no timestamp, put timestamp as 0 */
-               if (0 == result)
+               if (result == 0)
                        timestamp = 0;
 
                result = iio_push_to_buffers_with_timestamp(indio_dev, data,
-- 
2.5.0

Reply via email to