On Sat, Feb 20, 2016 at 12:01:53PM +0100, Ondrej Zary wrote: > Currently, workaround for broken WD drives is applied always, slowing > down all drives. And it has a bug - it's not applied after resume. > > Apply the workaround only if the error really appears > (SErr == 0x1000500). This allows unaffected drives to run at full speed > (provided that no affected drive is connected to the controller). > Also make sure the workaround is re-applied on resume. ... > Signed-off-by: Ondrej Zary <[email protected]>
Applied to libata/for-4.6. Thanks. -- tejun
