From: Michal Suchanek <hramr...@gmail.com>
When testing SPI without DMA I noticed that filling the FIFO on the
spi controller causes timeout. This should never happen with DMA support
so just adding a comment.
Signed-off-by: Michal Suchanek <hramr...@gmail.com>
---
drivers/spi/spi-sun4i.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index 78141a6..b750664 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -333,7 +333,9 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
sun4i_spi_write(sspi, SUN4I_DMA_CTL_REG, 0);
/* Fill the TX FIFO */
- sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
+ /* Filling the fifo fully causes timeout for some reason - at
least on spi2 on a10s */
+ /* The can_dma check is txlen >= SUN4I_FIFO_DEPTH so with DMA
this should never happen anyway. */
+ sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH - 1);
}
/* Start the transfer */
--
2.7.2
