Add helper function to set the state of active-discharge of regulator using regmap. The HW regulator driver can directly use this by providing the necessary information in the regulator descriptor.
Signed-off-by: Laxman Dewangan <[email protected]> --- drivers/regulator/helpers.c | 23 +++++++++++++++++++++++ include/linux/regulator/driver.h | 14 ++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index 3bbb326..b1e32e7 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -465,3 +465,26 @@ int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) return 0; } EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); + +/** + * regulator_set_active_discharge_regmap - Default set_active_discharge() + * using regmap + * + * @rdev: device to operate on. + * @enable: state to set, 0 to disable and 1 to enable. + */ +int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, + bool enable) +{ + unsigned int val; + + if (enable) + val = rdev->desc->active_discharge_on; + else + val = rdev->desc->active_discharge_off; + + return regmap_update_bits(rdev->regmap, + rdev->desc->active_discharge_reg, + rdev->desc->active_discharge_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 59dbaf7..cd271e8 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -269,6 +269,14 @@ enum regulator_type { * @bypass_mask: Mask for control when using regmap set_bypass * @bypass_val_on: Enabling value for control when using regmap set_bypass * @bypass_val_off: Disabling value for control when using regmap set_bypass + * @active_discharge_off: Enabling value for control when using regmap + * set_active_discharge + * @active_discharge_on: Disabling value for control when using regmap + * set_active_discharge + * @active_discharge_mask: Mask for control when using regmap + * set_active_discharge + * @active_discharge_reg: Register for control when using regmap + * set_active_discharge * * @enable_time: Time taken for initial enable of regulator (in uS). * @off_on_delay: guard time (in uS), before re-enabling a regulator @@ -318,6 +326,10 @@ struct regulator_desc { unsigned int bypass_mask; unsigned int bypass_val_on; unsigned int bypass_val_off; + unsigned int active_discharge_on; + unsigned int active_discharge_off; + unsigned int active_discharge_mask; + unsigned int active_discharge_reg; unsigned int enable_time; @@ -450,6 +462,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable); int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable); +int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, + bool enable); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); #endif -- 2.1.4
