Enhanced strobe stuff currently is beyond the scope of Secure Digital Host Controller Interface. So we can't find a register here to enable/disable it. We experct variant drivers to finish the details according to their vendor settings.
Signed-off-by: Shawn Lin <shawn....@rock-chips.com> --- drivers/mmc/host/sdhci.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 03fbb36..61a1af1 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2007,6 +2007,16 @@ out_unlock: return err; } +static int sdhci_prepare_enhanced_strobe(struct mmc_host *mmc, bool enable) +{ + /* + * Currently we can't find a register to enable enhanced strobe + * function for standard sdhci, so we expect variant drivers to + * overwrite it. + */ + return -EINVAL; +} + static int sdhci_select_drive_strength(struct mmc_card *card, unsigned int max_dtr, int host_drv, int card_drv, int *drv_type) @@ -2116,6 +2126,7 @@ static const struct mmc_host_ops sdhci_ops = { .enable_sdio_irq = sdhci_enable_sdio_irq, .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, .prepare_hs400_tuning = sdhci_prepare_hs400_tuning, + .prepare_enhanced_strobe = sdhci_prepare_enhanced_strobe, .execute_tuning = sdhci_execute_tuning, .select_drive_strength = sdhci_select_drive_strength, .card_event = sdhci_card_event, -- 2.3.7