We've introduced a new helper in the MMC core:
mmc_regulator_set_vqmmc(). Let's use this in mtk-sd. Using this new
helper has some advantages:
1. We get the mmc_regulator_set_vqmmc() behavior of trying to match
VQMMC and VMMC when the signal voltage is 3.3V. This ensures max
compatibility.
2. We get rid of a few more warnings when probing unsupported
voltages.
3. We get rid of some non-mediatek specific code in mtk-sd.
Signed-off-by: Nicolas Boichat <[email protected]>
---
Similar to e0848f5d294c703917260a6228cc08b8be46c527
mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch ,
where I copied the commit message from.
drivers/mmc/host/mtk-sd.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 07809f4..b17f30d 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1021,26 +1021,19 @@ static void msdc_set_buswidth(struct msdc_host *host,
u32 width)
static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct msdc_host *host = mmc_priv(mmc);
- int min_uv, max_uv;
int ret = 0;
if (!IS_ERR(mmc->supply.vqmmc)) {
- if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
- min_uv = 3300000;
- max_uv = 3300000;
- } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
- min_uv = 1800000;
- max_uv = 1800000;
- } else {
+ if (ios->signal_voltage != MMC_SIGNAL_VOLTAGE_330 &&
+ ios->signal_voltage != MMC_SIGNAL_VOLTAGE_180) {
dev_err(host->dev, "Unsupported signal voltage!\n");
return -EINVAL;
}
- ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
+ ret = mmc_regulator_set_vqmmc(mmc, ios);
if (ret) {
- dev_dbg(host->dev,
- "Regulator set error %d: %d - %d\n",
- ret, min_uv, max_uv);
+ dev_dbg(host->dev, "Regulator set error %d (%d)\n",
+ ret, ios->signal_voltage);
} else {
/* Apply different pinctrl settings for different
signal voltage */
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
--
2.7.0.rc3.207.g0ac5344
