We are getting build failure with tilepro allmodconfig with the error:
drivers/iio/adc/fsl-imx25-gcq.c:236:4: note: in expansion of macro 'do_div'
do_div(priv->channel_vref_mv[reg], 1000);
^
include/asm-generic/div64.h:198:17: note: expected 'uint64_t *
{aka long long unsigned int *}' but argument is of type 'u32 *
{aka unsigned int *}'
Create a temporary variable of type u64 and use that in do_div.
Signed-off-by: Sudip Mukherjee <[email protected]>
---
tilepro allmodconfig build log is at:
https://travis-ci.org/sudipm-mukherjee/parport/jobs/113325889
drivers/iio/adc/fsl-imx25-gcq.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index 2fd1927..e0636d4 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -174,6 +174,7 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
struct device *dev = &pdev->dev;
unsigned int refp_used[4] = {};
int ret, i;
+ u64 temp;
/*
* Setup all configurations registers with a default conversion
@@ -233,7 +234,9 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
priv->channel_vref_mv[reg] =
regulator_get_voltage(priv->vref[refp]);
/* Conversion from uV to mV */
- do_div(priv->channel_vref_mv[reg], 1000);
+ temp = priv->channel_vref_mv[reg];
+ do_div(temp, 1000);
+ priv->channel_vref_mv[reg] = temp;
break;
case MX25_ADC_REFP_INT:
priv->channel_vref_mv[reg] = 2500;
--
1.9.1
