On Fri, Feb 26, 2016 at 07:33:54PM +0530, Kedareswara rao Appana wrote:
> static void xilinx_vdma_halt(struct xilinx_vdma_chan *chan)
> {
> - int loop = XILINX_VDMA_LOOP_COUNT;
> + int err = 0;
> + u32 val;
>
> vdma_ctrl_clr(chan, XILINX_VDMA_REG_DMACR, XILINX_VDMA_DMACR_RUNSTOP);
>
> /* Wait for the hardware to halt */
> - do {
> - if (vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) &
> - XILINX_VDMA_DMASR_HALTED)
> - break;
> - } while (loop--);
> + err = xilinx_vdma_poll_timeout(chan, XILINX_VDMA_REG_DMASR, val,
> + (val & XILINX_VDMA_DMASR_HALTED), 0,
> + XILINX_VDMA_LOOP_COUNT);
>
> - if (!loop) {
> + if (err) {
> dev_err(chan->dev, "Cannot stop channel %p: %x\n",
> chan, vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR));
> chan->err = true;
> @@ -576,18 +579,17 @@ static void xilinx_vdma_halt(struct xilinx_vdma_chan
> *chan)
> */
> static void xilinx_vdma_start(struct xilinx_vdma_chan *chan)
> {
> - int loop = XILINX_VDMA_LOOP_COUNT;
> + int err = 0;
why is this initialization required here and other places?
> + u32 val;
>
> vdma_ctrl_set(chan, XILINX_VDMA_REG_DMACR, XILINX_VDMA_DMACR_RUNSTOP);
>
> /* Wait for the hardware to start */
> - do {
> - if (!(vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) &
> - XILINX_VDMA_DMASR_HALTED))
> - break;
> - } while (loop--);
> + err = xilinx_vdma_poll_timeout(chan, XILINX_VDMA_REG_DMASR, val,
> + !(val & XILINX_VDMA_DMASR_HALTED), 0,
> + XILINX_VDMA_LOOP_COUNT);
>
> - if (!loop) {
> + if (err) {
> dev_err(chan->dev, "Cannot start channel %p: %x\n",
> chan, vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR));
>
> @@ -754,21 +756,17 @@ static void xilinx_vdma_complete_descriptor(struct
> xilinx_vdma_chan *chan)
> */
> static int xilinx_vdma_reset(struct xilinx_vdma_chan *chan)
> {
> - int loop = XILINX_VDMA_LOOP_COUNT;
> + int err = 0;
> u32 tmp;
>
> vdma_ctrl_set(chan, XILINX_VDMA_REG_DMACR, XILINX_VDMA_DMACR_RESET);
>
> - tmp = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR) &
> - XILINX_VDMA_DMACR_RESET;
> -
> /* Wait for the hardware to finish reset */
> - do {
> - tmp = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR) &
> - XILINX_VDMA_DMACR_RESET;
> - } while (loop-- && tmp);
> + err = xilinx_vdma_poll_timeout(chan, XILINX_VDMA_REG_DMACR, tmp,
> + !(tmp & XILINX_VDMA_DMACR_RESET), 0,
> + XILINX_VDMA_LOOP_COUNT);
>
> - if (!loop) {
> + if (err) {
--
~Vinod
