On Tue, Jan 26, 2016 at 02:17:49PM +0200, Andy Shevchenko wrote:
> From: Mika Westerberg <mika.westerb...@linux.intel.com>
> 
> I2C host controller need to be configured properly in order to meet I2C
> timings specified in the I2C protocol specification. Some Intel Broxton
> based machines do not have this information in the ACPI namespace (or the
> boot firmware does not support ACPI at all) so we use build-in device
> properties instead.
> 
> Signed-off-by: Mika Westerberg <mika.westerb...@linux.intel.com>
> Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>

Hi Lee,

Any comments on this patch? If not, could you consider applying it to
the MFD tree?

Thanks.

> ---
>  drivers/mfd/intel-lpss-acpi.c | 12 ++++++++++++
>  drivers/mfd/intel-lpss-pci.c  | 12 ++++++++++++
>  2 files changed, 24 insertions(+)
> 
> diff --git a/drivers/mfd/intel-lpss-acpi.c b/drivers/mfd/intel-lpss-acpi.c
> index 06f00d6..5a8d9c7 100644
> --- a/drivers/mfd/intel-lpss-acpi.c
> +++ b/drivers/mfd/intel-lpss-acpi.c
> @@ -44,8 +44,20 @@ static const struct intel_lpss_platform_info bxt_info = {
>       .clk_rate = 100000000,
>  };
>  
> +static struct property_entry bxt_i2c_properties[] = {
> +     PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 42),
> +     PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
> +     PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
> +     { },
> +};
> +
> +static struct property_set bxt_i2c_pset = {
> +     .properties = bxt_i2c_properties,
> +};
> +
>  static const struct intel_lpss_platform_info bxt_i2c_info = {
>       .clk_rate = 133000000,
> +     .pset = &bxt_i2c_pset,
>  };
>  
>  static const struct acpi_device_id intel_lpss_acpi_ids[] = {
> diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
> index a7136c7..92b456f 100644
> --- a/drivers/mfd/intel-lpss-pci.c
> +++ b/drivers/mfd/intel-lpss-pci.c
> @@ -107,8 +107,20 @@ static const struct intel_lpss_platform_info 
> bxt_uart_info = {
>       .pset = &uart_pset,
>  };
>  
> +static struct property_entry bxt_i2c_properties[] = {
> +     PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 42),
> +     PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
> +     PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
> +     { },
> +};
> +
> +static struct property_set bxt_i2c_pset = {
> +     .properties = bxt_i2c_properties,
> +};
> +
>  static const struct intel_lpss_platform_info bxt_i2c_info = {
>       .clk_rate = 133000000,
> +     .pset = &bxt_i2c_pset,
>  };
>  
>  static const struct pci_device_id intel_lpss_pci_ids[] = {
> -- 
> 2.7.0.rc3

Reply via email to