The chip is also an 8 bit shift register which works out of the box as a GPO
expander with this patch
Signed-off-by: Nicolas Saenz Julienne <nicolassae...@gmail.com>
---
Documentation/devicetree/bindings/gpio/gpio-74x164.txt | 4 +++-
drivers/gpio/gpio-74x164.c | 1 +
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt
b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt
index cc26080..ce1b223 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt
@@ -1,7 +1,9 @@
* Generic 8-bits shift register GPIO driver
Required properties:
-- compatible : Should be "fairchild,74hc595"
+- compatible: Should contain one of the following:
+ "fairchild,74hc595"
+ "nxp,74lvc594"
- reg : chip select number
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells : Should be two. The first cell is the pin number and
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index c81224f..ebd0d1a 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -153,6 +153,7 @@ static int gen_74x164_remove(struct spi_device *spi)
static const struct of_device_id gen_74x164_dt_ids[] = {
{ .compatible = "fairchild,74hc595" },
+ { .compatible = "nxp,74lvc594" },
{},
};
MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids);
--
2.5.0
