Hi, all, On Wed, 2016-03-16 at 15:27 -0700, Laura Abbott wrote: > Hi, > > Fedora received a bug report > (https://bugzilla.redhat.com/show_bug.cgi?id=1317190) > of a major performance drop on various bench marks and general system > sluggishness with the 4.4.4 kernel update. The benchmarks were showing > a reduction to about 18% performance (not minor). > > Bisection showed the first bad commit was > > commit 774ac8b7eff69e0786970157de2157e68b22f456 > Author: Zhang Rui <[email protected]> > Date: Fri Oct 30 16:31:47 2015 +0800 > > Thermal: initialize thermal zone device correctly > > commit bb431ba26c5cd0a17c941ca6c3a195a3a6d5d461 upstream. > > After thermal zone device registered, as we have not read any > temperature before, thus tz->temperature should not be 0, > which actually means 0C, and thermal trend is not available. > In this case, we need specially handling for the first > thermal_zone_device_update(). > > Both thermal core framework and step_wise governor is > enhanced to handle this. And since the step_wise governor > is the only one that uses trends, so it's the only thermal > governor that needs to be updated. > > Tested-by: Manuel Krause <[email protected]> > Tested-by: szegad <[email protected]> > Tested-by: prash <[email protected]> > Tested-by: amish <[email protected]> > Tested-by: Matthias <[email protected]> > Reviewed-by: Javi Merino <[email protected]> > Signed-off-by: Zhang Rui <[email protected]> > Signed-off-by: Chen Yu <[email protected]> > Signed-off-by: Greg Kroah-Hartman <[email protected]>
According to https://bugzilla.redhat.com/show_bug.cgi?id=1317190#c30 and https://bugzilla.kernel.org/show_bug.cgi?id=114551, the root cause of the problem is that 1. BIOS reports bogus passive trip point value, which is 0 degree Celsius 2. Without the thermal patches, thermal core does nothing upon driver probe, thus processor cooling states are not changed. 3. With the thermal patches applied, thermal core checks the new registered thermal zone driver when it is probed, and set the cooling devices to proper state, for example, fan device could be spinning during boot, even if the system is cool. 4. Thus, on these Lenovo laptops, processor cooling devices are throttled because the current temperature (around 50C) is higher than the passive trip point (0C), and the thermal zone is considered as overheating. In order to workaround this bogus BIOS, we should disable those invalid trip points by checking the trip point value, like the patch below, Laura and Vlad, can you please try the patch below and confirm if it fixes the problem for you? >From 81ad4276b505e987dd8ebbdf63605f92cd172b52 Mon Sep 17 00:00:00 2001 From: Zhang Rui <[email protected]> Date: Fri, 18 Mar 2016 10:03:24 +0800 Subject: [PATCH] Thermal: Ignore invalid trip points In some cases, platform thermal driver may report invalid trip points, thermal core should not take any action for these trip points. This fixed a regression that bogus trip point starts to screw up thermal control on some Lenovo laptops, after commit bb431ba26c5cd0a17c941ca6c3a195a3a6d5d461 Author: Zhang Rui <[email protected]> Date: Fri Oct 30 16:31:47 2015 +0800 Thermal: initialize thermal zone device correctly After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. Tested-by: Manuel Krause <[email protected]> Tested-by: szegad <[email protected]> Tested-by: prash <[email protected]> Tested-by: amish <[email protected]> Tested-by: Matthias <[email protected]> Reviewed-by: Javi Merino <[email protected]> Signed-off-by: Zhang Rui <[email protected]> Signed-off-by: Chen Yu <[email protected]> CC: <[email protected]> #3.18+ Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317190 Link: https://bugzilla.kernel.org/show_bug.cgi?id=114551 Signed-off-by: Zhang Rui <[email protected]> --- drivers/thermal/thermal_core.c | 13 ++++++++++++- include/linux/thermal.h | 2 ++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index a0a8fd1..d4b5465 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -454,6 +454,10 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip) { enum thermal_trip_type type; + /* Ignore disabled trip points */ + if (test_bit(trip, &tz->trips_disabled)) + return; + tz->ops->get_trip_type(tz, trip, &type); if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT) @@ -1800,6 +1804,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, { struct thermal_zone_device *tz; enum thermal_trip_type trip_type; + int trip_temp; int result; int count; int passive = 0; @@ -1871,9 +1876,15 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, goto unregister; for (count = 0; count < trips; count++) { - tz->ops->get_trip_type(tz, count, &trip_type); + if (tz->ops->get_trip_type(tz, count, &trip_type)) + set_bit(count, &tz->trips_disabled); if (trip_type == THERMAL_TRIP_PASSIVE) passive = 1; + if (tz->ops->get_trip_temp(tz, count, &trip_temp)) + set_bit(count, &tz->trips_disabled); + /* Check for bogus trip points */ + if (trip_temp == 0) + set_bit(count, &tz->trips_disabled); } if (!passive) { diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 9c48199..a55d052 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -156,6 +156,7 @@ struct thermal_attr { * @trip_hyst_attrs: attributes for trip points for sysfs: trip hysteresis * @devdata: private pointer for device private data * @trips: number of trip points the thermal zone supports + * @trips_disabled; bitmap for disabled trips * @passive_delay: number of milliseconds to wait between polls when * performing passive cooling. * @polling_delay: number of milliseconds to wait between polls when @@ -191,6 +192,7 @@ struct thermal_zone_device { struct thermal_attr *trip_hyst_attrs; void *devdata; int trips; + unsigned long trips_disabled; /* bitmap for disabled trips */ int passive_delay; int polling_delay; int temperature; -- 1.9.1
