On Mon, Mar 07, 2016 at 04:41:57PM -0500, [email protected] wrote:
>
> lspci says:
> 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port
> SATA Controller [AHCI mode] (rev 04)
>
> Not sure why I only see it on reboots - that means that when powering up, the
> kernel
> gets handed a device config it likes, but when rebooting, something is
> leaving the
> device in a config the kernel doesn't want to see.
Okay, so the BIOS defines one RMRR entry:
DMAR: RMRR base: 0x000000cdb11000 end: 0x000000cdb30fff
But the device-scope doesn't seem to match any existing devices in your
system. At least no device gets the RMRR mappings later on.
That doesn't really matter, as the the fault-address of 0xcdacd000 is
outside of the defined RMRR range anyway.
Looking at the fault-address as system physical, is would be in this
range of system memory:
BIOS-e820: [mem 0x00000000cd99b000-0x00000000ce3a0fff] reserved
Which is reserved for BIOS use. This looks very much like a missing RMRR
entry for that range, that has the sata controler in its device scope.
Joerg
