On Wed, Mar 16, 2016 at 04:52:09PM +0100, Robin van der Gracht wrote:
> This is a driver for the Holtek HT16K33 RAM mapping LED controller with
> keyscan.
Wrap your lines to less than 80 chars.
> Signed-off-by: Robin van der Gracht <ro...@protonic.nl>
> ---
>
> Changes in v4:
> - Removed trailing dot from patch title
> - Removed unused defines
> - Fixed brightness range (0 was presumed to be off but its 1/16 duty cycle)
> - No longer checking 'reschedule' before setting it in ht16k33_keypad_scan()
> - Use more efficient ffs() to find changed rows in ht16k33_keypad_scan()
> - Use BIT macro in ht16k33_keypad_scan()
> - Removed extra space in return line from ht16k33_bl_check_fb()
> - Removed redundant 'Out of Memory' prints from ht16k33_probe()
> - Changed bustype from BUS_HOST to BUS_I2C
>
> .../devicetree/bindings/display/ht16k33.txt | 42 ++
> drivers/auxdisplay/Kconfig | 9 +
> drivers/auxdisplay/Makefile | 1 +
> drivers/auxdisplay/ht16k33.c | 563
> +++++++++++++++++++++
> 4 files changed, 615 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/ht16k33.txt
> create mode 100644 drivers/auxdisplay/ht16k33.c
>
> diff --git a/Documentation/devicetree/bindings/display/ht16k33.txt
> b/Documentation/devicetree/bindings/display/ht16k33.txt
> new file mode 100644
> index 0000000..20ef996
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/ht16k33.txt
> @@ -0,0 +1,42 @@
> +Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan
> +-------------------------------------------------------------------------------
> +
> +Required properties:
> +- compatible: "ht,ht16k33"
> +- reg: I2C slave address of the chip.
> +- interrupt-parent: A phandle pointing to the interrupt controller\
Drop the \
> + serving the interrupt for this chip.
> +- interrupts: Interrupt specification for the key pressed
> interrupt.
> +- refresh-rate-hz: Display update interval in HZ.
> +- debounce-delay-ms: Debouncing interval time in microseconds.
> +- linux,keymap: The keymap for keys as described in the binding
> + document (devicetree/bindings/input/matrix-keymap.txt).
> +
> +Optional properties:
> +- linux,no-autorepeat: Disable keyrepeat.
> +- default-brightness-level: Initial brightness level [0-15] (default: 15).
> +
> +Example:
> +
> +&i2c1 {
> + ht16k33: ht16k33@70 {
> + compatible = "ht,ht16k33";
> + reg = <0x70>;
> + refresh-rate-hz = <20>;
> + debounce-delay-ms = <50>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
> + linux,keymap = <
> + MATRIX_KEY(2, 0, KEY_F6)
> + MATRIX_KEY(3, 0, KEY_F8)
> + MATRIX_KEY(4, 0, KEY_F0)
> + MATRIX_KEY(5, 0, KEY_F4)
> + MATRIX_KEY(6, 0, KEY_F2)
> + MATRIX_KEY(2, 1, KEY_F5)
> + MATRIX_KEY(3, 1, KEY_F7)
> + MATRIX_KEY(4, 1, KEY_F9)
> + MATRIX_KEY(5, 1, KEY_F3)
> + MATRIX_KEY(6, 1, KEY_F1)
> + >;
> + };
> +};
