Michael & Stephen, Should we resubmit this series for 4.7 ?
Also to follow up on your previous request to use the platform driver framework. We have noticed recent submissions use a style that mixes early clocks registered with CLK_OF_DECLARE and the remaining clocks registered through a platform driver. Is this the style we should implement ?
Best Regards, Lars Persson On 02/25/2016 03:58 PM, Lars Persson wrote:
Add clock support for the Artpec-6 SoC port. The ARM parts are in the series "arm: Add Artpec-6 SoC" and it goes through the arm-soc tree. Changes since v3: - The binding was corrected to handle two fractional divider clocks as input to the clock controller. - Updated clk-artpec6.c to handle a distinct fractional divider input for each i2s clock mux. Changes since v2: - Moved axis,artpec6-clkctrl.h to the first patch with the DT bindings. Changes since v1: - The driver now provides all clocks from the main clock controller block through one DT node. - Added a header file for the clock indexes. - Refer to clock-bindings.txt in the bindings document. A platform driver was not possible because the clocks are needed earlier in the kernel startup. Lars Persson (2): clk: add device tree binding for Artpec-6 clock controller clk: add artpec-6 clock controller .../devicetree/bindings/clock/artpec6.txt | 41 +++++ drivers/clk/Makefile | 1 + drivers/clk/axis/Makefile | 1 + drivers/clk/axis/clk-artpec6.c | 189 +++++++++++++++++++++ include/dt-bindings/clock/axis,artpec6-clkctrl.h | 38 +++++ 5 files changed, 270 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/artpec6.txt create mode 100644 drivers/clk/axis/Makefile create mode 100644 drivers/clk/axis/clk-artpec6.c create mode 100644 include/dt-bindings/clock/axis,artpec6-clkctrl.h
