Set general "critical" trip temperatures for cpu, gpu, mem and pllx
thermal zones on Tegra132, these trips can trigger shut down or reset.

Signed-off-by: Wei Ni <[email protected]>
---
 arch/arm64/boot/dts/nvidia/tegra132.dtsi | 62 +++++++++++++++++++++++++++++++-
 1 file changed, 61 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi 
b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index bd5010a7cba4..40fe2bcb55d2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -729,7 +729,7 @@
 
        soctherm: thermal-sensor@0,700e2000 {
                compatible = "nvidia,tegra132-soctherm";
-               reg = <0x0 0x700e2000 0x0 0x1000>;
+               reg = <0x0 0x700e2000 0x0 0x600>;
                interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
                        <&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -746,6 +746,21 @@
 
                        thermal-sensors =
                                <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+                       trips {
+                               cpu_shutdown_trip {
+                                       temperature = <105000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+
+                       cooling-maps {
+                               /*
+                                * There are currently no cooling maps,
+                                * because there are no cooling devices.
+                                */
+                       };
                };
                mem {
                        polling-delay-passive = <0>;
@@ -753,6 +768,21 @@
 
                        thermal-sensors =
                                <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+                       trips {
+                               mem_shutdown_trip {
+                                       temperature = <101000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+
+                       cooling-maps {
+                               /*
+                                * There are currently no cooling maps,
+                                * because there are no cooling devices.
+                                */
+                       };
                };
                gpu {
                        polling-delay-passive = <1000>;
@@ -760,6 +790,21 @@
 
                        thermal-sensors =
                                <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+                       trips {
+                               gpu_shutdown_trip {
+                                       temperature = <101000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+
+                       cooling-maps {
+                               /*
+                                * There are currently no cooling maps,
+                                * because there are no cooling devices.
+                                */
+                       };
                };
                pllx {
                        polling-delay-passive = <0>;
@@ -767,6 +812,21 @@
 
                        thermal-sensors =
                                <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+                       trips {
+                               pllx_shutdown_trip {
+                                       temperature = <105000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+
+                       cooling-maps {
+                               /*
+                                * There are currently no cooling maps,
+                                * because there are no cooling devices.
+                                */
+                       };
                };
        };
 
-- 
1.9.1

Reply via email to