4.2.8-ckt7 -stable review patch. If anyone has any objections, please let me know.
---8<------------------------------------------------------------ From: Mario Kleiner <[email protected]> commit 459ee1c3fd097ab56ababd8ff4bb7ef6a792de33 upstream. As observed on Apple iMac10,1, DCE-3.2, RV-730, link rate of 2.7 Ghz is not selected, because the args.v1.ucConfig flag setting for 2.7 Ghz gets overwritten by a following assignment of the transmitter to use. Move link rate setup a few lines down to fix this. In practice this didn't have any positive or negative effect on display setup on the tested iMac10,1 so i don't know if backporting to stable makes sense or not. Signed-off-by: Mario Kleiner <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> --- drivers/gpu/drm/radeon/atombios_encoders.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index bb29214..adf74f4 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -892,8 +892,6 @@ atombios_dig_encoder_setup2(struct drm_encoder *encoder, int action, int panel_m else args.v1.ucLaneNum = 4; - if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) && (dp_clock == 270000)) - args.v1.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ; switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER1; @@ -910,6 +908,10 @@ atombios_dig_encoder_setup2(struct drm_encoder *encoder, int action, int panel_m args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKB; else args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKA; + + if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) && (dp_clock == 270000)) + args.v1.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ; + break; case 2: case 3: -- 2.7.4
