On 01/04/16 15:54, Boris Brezillon wrote: > The core now takes care of parsing generic DT properties in > nand_scan_ident() when nand_set_flash_node() has been called. > Rely on this initialization instead of calling of_get_nand_xxx() > manually. > > Signed-off-by: Boris Brezillon <[email protected]>
Acked-by: Roger Quadros <[email protected]> cheers, -roger > --- > drivers/memory/omap-gpmc.c | 7 ------- > drivers/mtd/nand/omap2.c | 9 ++++++--- > 2 files changed, 6 insertions(+), 10 deletions(-) > > diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c > index 21825dd..85aa85e 100644 > --- a/drivers/memory/omap-gpmc.c > +++ b/drivers/memory/omap-gpmc.c > @@ -25,7 +25,6 @@ > #include <linux/platform_device.h> > #include <linux/of.h> > #include <linux/of_address.h> > -#include <linux/of_mtd.h> > #include <linux/of_device.h> > #include <linux/of_platform.h> > #include <linux/omap-gpmc.h> > @@ -1876,12 +1875,6 @@ static int gpmc_probe_nand_child(struct > platform_device *pdev, > break; > } > > - gpmc_nand_data->flash_bbt = of_get_nand_on_flash_bbt(child); > - > - val = of_get_nand_bus_width(child); > - if (val == 16) > - gpmc_nand_data->devsize = NAND_BUSWIDTH_16; > - > gpmc_read_timings_dt(child, &gpmc_t); > gpmc_nand_init(gpmc_nand_data, &gpmc_t); > > diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c > index 0749ca1..8921283 100644 > --- a/drivers/mtd/nand/omap2.c > +++ b/drivers/mtd/nand/omap2.c > @@ -1704,9 +1704,7 @@ static int omap_nand_probe(struct platform_device *pdev) > } > > if (pdata->flash_bbt) > - nand_chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; > - else > - nand_chip->options |= NAND_SKIP_BBTSCAN; > + nand_chip->bbt_options |= NAND_BBT_USE_FLASH; > > /* scan NAND device connected to chip controller */ > nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16; > @@ -1716,6 +1714,11 @@ static int omap_nand_probe(struct platform_device > *pdev) > goto return_error; > } > > + if (nand_chip->bbt_options & NAND_BBT_USE_FLASH) > + nand_chip->bbt_options |= NAND_BBT_NO_OOB; > + else > + nand_chip->options |= NAND_SKIP_BBTSCAN; > + > /* re-populate low-level callbacks based on xfer modes */ > switch (pdata->xfer_type) { > case NAND_OMAP_PREFETCH_POLLED: >
