Hi,
On 03/31/2016 01:48 PM, ttha...@opensource.altera.com wrote:
From: Thor Thayer <ttha...@opensource.altera.com>
Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to
be enabled and memory initialized before data is stored in memory
otherwise the ECC will fail on reads.
Signed-off-by: Thor Thayer <ttha...@opensource.altera.com>
---
v2: Add Arria10 ECC block initialization locally.
---
arch/arm/mach-socfpga/ocram.c | 128 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
index 60ec643..d4a524c 100644
--- a/arch/arm/mach-socfpga/ocram.c
+++ b/arch/arm/mach-socfpga/ocram.c
@@ -13,12 +13,15 @@
* You should have received a copy of the GNU General Public License along
with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/genalloc.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include "core.h"
+
#define ALTR_OCRAM_CLEAR_ECC 0x00000018
#define ALTR_OCRAM_ECC_EN 0x00000019
@@ -47,3 +50,128 @@ void socfpga_init_ocram_ecc(void)
iounmap(mapped_ocr_edac_addr);
}
+
+/* Arria10 OCRAM Section */
+#define ALTR_A10_ECC_CTRL_OFST 0x08
+#define ALTR_A10_OCRAM_ECC_EN_CTL (BIT(1) | BIT(0))
+#define ALTR_A10_ECC_INITA BIT(16)
+
+#define ALTR_A10_ECC_INITSTAT_OFST 0x0C
+#define ALTR_A10_ECC_INITCOMPLETEA BIT(0)
+#define ALTR_A10_ECC_INITCOMPLETEB BIT(8)
+
+#define ALTR_A10_ECC_ERRINTEN_OFST 0x10
+#define ALTR_A10_ECC_SERRINTEN BIT(0)
+
+#define ALTR_A10_ECC_INTSTAT_OFST 0x20
+#define ALTR_A10_ECC_SERRPENA BIT(0)
+#define ALTR_A10_ECC_DERRPENA BIT(8)
+#define ALTR_A10_ECC_ERRPENA_MASK (ALTR_A10_ECC_SERRPENA | \
+ ALTR_A10_ECC_DERRPENA)
+/* ECC Manager Defines */
+#define A10_SYSMGR_ECC_INTMASK_SET_OFST 0x94
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST 0x98
+#define A10_SYSMGR_ECC_INTMASK_OCRAM BIT(1)
+
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US 10000
+
+static void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ value |= bit_mask;
+ writel(value, ioaddr);
+}
+
+static void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ value &= ~bit_mask;
+ writel(value, ioaddr);
+}
+
+static int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr)
+{
+ int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+
+ ecc_set_bits(ALTR_A10_ECC_INITA, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+ while (limit--) {
+ if (ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA,
+ (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+ break;
+ udelay(1);
+ }
+ if (limit < 0)
+ return -EBUSY;
+
+ /* Clear any pending ECC interrupts */
+ writel(ALTR_A10_ECC_ERRPENA_MASK,
+ (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+ return 0;
+}
+
+void socfpga_init_arria10_ocram_ecc(void)
+{
+ struct device_node *np;
+ int ret = 0;
+ void __iomem *ecc_block_base;
+
+ if (!sys_manager_base_addr) {
+ pr_err("SOCFPGA: sys-mgr is not initialized\n");
+ return;
+ }
+
+ /* Find the OCRAM EDAC device tree node */
+ np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
+ if (!np) {
+ pr_err("Unable to find socfpga-a10-ocram-ecc\n");
+ return;
+ }
+
+ /* Map the ECC Block */
+ ecc_block_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!ecc_block_base) {
+ pr_err("Unable to map OCRAM ECC block\n");
+ return;
+ }
+
+ /* Disable ECC */
+ writel(ALTR_A10_OCRAM_ECC_EN_CTL,
+ sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_SET_OFST);
+ ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
+ (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+ ecc_clear_bits(ALTR_A10_OCRAM_ECC_EN_CTL,
+ (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+
+ /* Use HW initialization block to initialize memory for ECC */
+ ret = altr_init_memory_port(ecc_block_base);
+ if (ret) {
+ pr_err("ECC: cannot init OCRAM PORTA memory\n");
+ return;
I realize that I'm not calling iounmap(ecc_block_base) and I'll fix that
in the next revision with a goto.
+ }
+
+ /* Enable ECC */
+ ecc_set_bits(ALTR_A10_OCRAM_ECC_EN_CTL,
+ (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+ ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
+ (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+ writel(ALTR_A10_OCRAM_ECC_EN_CTL,
+ sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_CLR_OFST);
+
The iounmap() will go here. I'd still like to hear review comments for
the rest.
Thanks for reviewing.
+ /* Ensure all writes complete */
+ wmb();
+}
