Hello Krzysztof, On 04/20/2016 05:24 AM, Krzysztof Kozlowski wrote: > If during probe() the s3c24xx_i2c_init() failed, the clock was left in > disabled but prepared state. > > Signed-off-by: Krzysztof Kozlowski <[email protected]> > --- > drivers/i2c/busses/i2c-s3c2410.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/i2c/busses/i2c-s3c2410.c > b/drivers/i2c/busses/i2c-s3c2410.c > index 362a6de54833..e9658af36f2e 100644 > --- a/drivers/i2c/busses/i2c-s3c2410.c > +++ b/drivers/i2c/busses/i2c-s3c2410.c > @@ -1200,6 +1200,7 @@ static int s3c24xx_i2c_probe(struct platform_device > *pdev) > clk_disable(i2c->clk); > if (ret != 0) { > dev_err(&pdev->dev, "I2C controller init failed\n"); > + clk_unprepare(i2c->clk); > return ret; > } > /* find the IRQ for this unit (note, this relies on the init call to >
Reviewed-by: Javier Martinez Canillas <[email protected]> Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America
