Hi,
> -----Original Message-----
> From: [email protected] [mailto:dmaengine-
> [email protected]] On Behalf Of Pramod Gurav
> Sent: Monday, May 02, 2016 5:48 PM
> To: [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]
> Cc: [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; Pramod Gurav <[email protected]>
> Subject: [PATCH 1/2] dmaengine: qcom-bam-dma: Add pm_runtime support
>
> Adds pm_runtime support for BAM DMA so that clock
> is enabled only when there is a transaction going on to help
> save power.
>
> Signed-off-by: Pramod Gurav <[email protected]>
> ---
> drivers/dma/qcom/bam_dma.c | 88
> +++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 87 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
> index 5b427c4..577f323 100644
> --- a/drivers/dma/qcom/bam_dma.c
> +++ b/drivers/dma/qcom/bam_dma.c
> @@ -48,6 +48,7 @@
> #include <linux/of_dma.h>
> #include <linux/clk.h>
> #include <linux/dmaengine.h>
> +#include <linux/pm_runtime.h>
>
> #include "../dmaengine.h"
> #include "../virt-dma.h"
> @@ -58,6 +59,8 @@ struct bam_desc_hw {
> u16 flags;
> };
>
> +#define BAM_DMA_AUTOSUSPEND_DELAY 100
> +
> #define DESC_FLAG_INT BIT(15)
> #define DESC_FLAG_EOT BIT(14)
> #define DESC_FLAG_EOB BIT(13)
> @@ -535,6 +538,7 @@ static void bam_free_chan(struct dma_chan *chan)
> return;
> }
>
> + pm_runtime_get_sync(bdev->dev);
> spin_lock_irqsave(&bchan->vc.lock, flags);
> bam_reset_channel(bchan);
> spin_unlock_irqrestore(&bchan->vc.lock, flags);
> @@ -550,6 +554,8 @@ static void bam_free_chan(struct dma_chan *chan)
>
> /* disable irq */
> writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_IRQ_EN));
> + pm_runtime_mark_last_busy(bdev->dev);
> + pm_runtime_put_autosuspend(bdev->dev);
> }
>
> /**
> @@ -696,10 +702,13 @@ static int bam_pause(struct dma_chan *chan)
> struct bam_device *bdev = bchan->bdev;
> unsigned long flag;
>
> + pm_runtime_get_sync(bdev->dev);
> spin_lock_irqsave(&bchan->vc.lock, flag);
> writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_HALT));
> bchan->paused = 1;
> spin_unlock_irqrestore(&bchan->vc.lock, flag);
> + pm_runtime_mark_last_busy(bdev->dev);
> + pm_runtime_put_autosuspend(bdev->dev);
>
> return 0;
> }
> @@ -715,10 +724,13 @@ static int bam_resume(struct dma_chan *chan)
> struct bam_device *bdev = bchan->bdev;
> unsigned long flag;
>
> + pm_runtime_get_sync(bdev->dev);
> spin_lock_irqsave(&bchan->vc.lock, flag);
> writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_HALT));
> bchan->paused = 0;
> spin_unlock_irqrestore(&bchan->vc.lock, flag);
> + pm_runtime_mark_last_busy(bdev->dev);
> + pm_runtime_put_autosuspend(bdev->dev);
>
> return 0;
> }
> @@ -943,6 +955,7 @@ static void bam_start_dma(struct bam_chan *bchan)
> wmb();
> writel_relaxed(bchan->tail * sizeof(struct bam_desc_hw),
> bam_addr(bdev, bchan->id, BAM_P_EVNT_REG));
> +
Unrelated change...
> }
>
> /**
> @@ -967,6 +980,9 @@ static void dma_tasklet(unsigned long data)
> bam_start_dma(bchan);
> spin_unlock_irqrestore(&bchan->vc.lock, flags);
> }
> +
> + pm_runtime_mark_last_busy(bdev->dev);
> + pm_runtime_put_autosuspend(bdev->dev);
> }
>
> /**
> @@ -978,8 +994,12 @@ static void dma_tasklet(unsigned long data)
> static void bam_issue_pending(struct dma_chan *chan)
> {
> struct bam_chan *bchan = to_bam_chan(chan);
> + struct bam_device *bdev = bchan->bdev;
> unsigned long flags;
>
> + if (pm_runtime_status_suspended(bdev->dev))
> + pm_runtime_get_sync(bdev->dev);
> +
> spin_lock_irqsave(&bchan->vc.lock, flags);
>
> /* if work pending and idle, start a transaction */
> @@ -1210,6 +1230,13 @@ static int bam_dma_probe(struct platform_device
> *pdev)
> if (ret)
> goto err_unregister_dma;
>
> + pm_runtime_irq_safe(&pdev->dev);
> + pm_runtime_set_autosuspend_delay(&pdev->dev,
> BAM_DMA_AUTOSUSPEND_DELAY);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_runtime_mark_last_busy(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> +
> return 0;
>
> err_unregister_dma:
> @@ -1221,7 +1248,6 @@ err_tasklet_kill:
> tasklet_kill(&bdev->task);
> err_disable_clk:
> clk_disable_unprepare(bdev->bamclk);
> -
Unrelated change....
> return ret;
> }
>
> @@ -1252,16 +1278,76 @@ static int bam_dma_remove(struct
> platform_device *pdev)
>
> tasklet_kill(&bdev->task);
>
> + pm_runtime_get_sync(&pdev->dev);
> clk_disable_unprepare(bdev->bamclk);
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> + pm_runtime_set_suspended(&pdev->dev);
> +
> + return 0;
> +}
> +
> +static int bam_dma_runtime_suspend(struct device *dev)
> +{
> + struct bam_device *bdev = dev_get_drvdata(dev);
> +
> + clk_disable(bdev->bamclk);
> +
> + return 0;
> +}
> +
> +static int bam_dma_runtime_resume(struct device *dev)
> +{
> + struct bam_device *bdev = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = clk_enable(bdev->bamclk);
Instead of clk_enable why can't you call the clk_prepare_enable directly here?
clk_disable_unprepare in the suspend.
I mean in the probe remove the clk_prepare_enable and wherever you need to
access the
Device register call the pm_runtime_get_sync.
Thanks,
Kedar.
> + if (ret < 0) {
> + dev_err(dev, "clk_enable failed: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +#ifdef CONFIG_PM_SLEEP
> +static int bam_dma_suspend(struct device *dev)
> +{
> + struct bam_device *bdev = dev_get_drvdata(dev);
> +
> + pm_runtime_force_suspend(dev);
> +
> + clk_unprepare(bdev->bamclk);
> +
> + return 0;
> +}
> +
> +static int bam_dma_resume(struct device *dev)
> +{
> + struct bam_device *bdev = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = clk_prepare(bdev->bamclk);
> + if (ret)
> + return ret;
> +
> + pm_runtime_force_resume(dev);
>
> return 0;
> }
> +#endif
> +
> +static const struct dev_pm_ops bam_dma_pm_ops = {
> + SET_LATE_SYSTEM_SLEEP_PM_OPS(bam_dma_suspend,
> bam_dma_resume)
> + SET_RUNTIME_PM_OPS(bam_dma_runtime_suspend,
> bam_dma_runtime_resume,
> + NULL)
> +};
>
> static struct platform_driver bam_dma_driver = {
> .probe = bam_dma_probe,
> .remove = bam_dma_remove,
> .driver = {
> .name = "bam-dma-engine",
> + .pm = &bam_dma_pm_ops,
> .of_match_table = bam_of_match,
> },
> };
> --
> 1.8.2.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe dmaengine" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
