On Fri, May 20, 2016 at 07:29:59AM -0700, Andi Kleen wrote:
> From: Andi Kleen <[email protected]>
>
> When --metric-only is enabled there were no headers for the topology
> in interval mode. Fix this here.
>
> Before
>
> $ perf stat --metric-only -e cycles,instructions -a -I 1000
> 1.000554967 insn per cycle stalled cycles per insn
> 1.000554967 0.27
> 2.000862000 0.24
> 3.001354948 0.25
>
> After
>
> $ perf stat --metric-only -e cycles,instructions -a -I 1000
> 1.000554967 insn per cycle stalled cycles per insn
> 1.000554967 0.27
> 2.000862000 0.24
> 3.001354948 0.25
hum, I'm getting something else:
[jolsa@ibm-x3650m4-01 perf]$ sudo ./perf stat --topdown -I 1000 -a
nmi_watchdog enabled with topdown. May give wrong results.
Disable with echo 0 > /proc/sys/kernel/nmi_watchdog
# time core cpus
1.001710838 retiring bad speculation
frontend bound backend bound
1.001710838 S0-C0 2 38.1% -0.0%
58.8% 3.1%
1.001710838 S0-C1 2 38.0% 0.0%
59.4% 2.5%
[jolsa@ibm-x3650m4-01 perf]$ sudo ./perf stat --metric-only -e
cycles,instructions -a -I 1000
# time
1.000756338 insn per cycle stalled cycles per insn
1.000756338 0.32
2.001155562 0.30
jirka
