* Robert Nelson <[email protected]> [160602 10:48]: > On Thu, Jun 2, 2016 at 12:39 PM, Tony Lindgren <[email protected]> wrote: > > > > * Robert Nelson <[email protected]> [160602 10:39]: > > > On Thu, Jun 2, 2016 at 2:41 AM, Yong Li <[email protected]> wrote: > > > > > > > From: Yong Li <[email protected]> > > > > > > > > Without this patch, I2C-1 is missing on beaglebone black boards > > > > > > > > Signed-off-by: Yong Li <[email protected]> > > > > --- > > > > arch/arm/boot/dts/am335x-boneblack.dts | 15 +++++++++++++++ > > > > 1 file changed, 15 insertions(+) > > > > > > > > > > > > > This is also 'common' for the white/green, if your really going to push > > > this, please add it to: > > > > > > am335x-bone-common.dtsi > > > > But isn't this exposed on the cape pins? So the use can be > > whatever for these pins? > > That is correct, "i2c1" is on the cape connector, with no primary > function defined. > > Currently on mainline, the board and cape eeprom i2c bus's are enabled. > > i2c0 = board eeprom > i2c2 = 'cape' eeprom > > personally, nak by me to add i2c1 by default, should use overlay's to enable > it.
Yes sounds like the best we can do is define it but set it with status = "disabled" for now. Regards, Tony
