On 06/07/2016 11:57 PM, Ji-Ze Hong (Peter Hong) wrote:
Adds watchdog enable support for Fintek F81866 Super-IO chip to
Fintek wdt driver (f71808e_wdt)
Tested and verified on iBASE MI802 Industrial PC
Datasheet references:
http://www.alldatasheet.com/datasheet-pdf/pdf/459085/FINTEK/F81866AD-I.html
Suggested-by: Guenter Roeck <[email protected]>
Signed-off-by: Ji-Ze Hong (Peter Hong) <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
---
Change Log:
V2:
1. Put the newer F81866 registers in order with olds.
2. Set the register from constant value to BIT() marco
drivers/watchdog/f71808e_wdt.c | 28 ++++++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
index d4ba262..3b2de11 100644
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -45,9 +45,11 @@
#define SIO_REG_DEVREV 0x22 /* Device revision */
#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
#define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */
+#define SIO_F81866_REG_PORT_SEL 0x27 /* F81866 Multi-Function
Register */
#define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */
#define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */
#define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */
+#define SIO_F81866_REG_GPIO1 0x2c /* F81866 GPIO1 Enable Register */
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
@@ -60,6 +62,7 @@
#define SIO_F71882_ID 0x0541 /* Chipset ID */
#define SIO_F71889_ID 0x0723 /* Chipset ID */
#define SIO_F81865_ID 0x0704 /* Chipset ID */
+#define SIO_F81866_ID 0x1010 /* Chipset ID */
#define F71808FG_REG_WDO_CONF 0xf0
#define F71808FG_REG_WDT_CONF 0xf5
@@ -116,7 +119,8 @@ module_param(start_withtimeout, uint, 0);
MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
" given initial timeout. Zero (default) disables this feature.");
-enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865
};
+enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865,
+ f81866};
static const char *f71808e_names[] = {
"f71808fg",
@@ -126,6 +130,7 @@ static const char *f71808e_names[] = {
"f71882fg",
"f71889fg",
"f81865",
+ "f81866",
};
/* Super-I/O Function prototypes */
@@ -370,6 +375,22 @@ static int watchdog_start(void)
superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 5);
break;
+ case f81866:
+ /* Set pin 70 to WDTRST# */
+ superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
+ BIT(3) | BIT(0));
+ superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
+ BIT(2));
+ /*
+ * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0.
+ * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch:
+ * BIT5: 0 -> WDTRST#
+ * 1 -> GPIO15
+ */
+ superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1,
+ BIT(5));
+ break;
+
default:
/*
* 'default' label to shut up the compiler and catch
@@ -382,7 +403,7 @@ static int watchdog_start(void)
superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0);
- if (watchdog.type == f81865)
+ if (watchdog.type == f81865 || watchdog.type == f81866)
superio_set_bit(watchdog.sioaddr, F81865_REG_WDO_CONF,
F81865_FLAG_WDOUT_EN);
else
@@ -788,6 +809,9 @@ static int __init f71808e_find(int sioaddr)
case SIO_F81865_ID:
watchdog.type = f81865;
break;
+ case SIO_F81866_ID:
+ watchdog.type = f81866;
+ break;
default:
pr_info("Unrecognized Fintek device: %04x\n",
(unsigned int)devid);
