Hi all,
On 14/06/16 21:26, Jon Hunter wrote:
> Commit 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210")
> enables the Tegra I2C 'div_clk' for adapters using the multi-master mode
> during the device probe. Although the probe error path was updated to
> disable the clock on probe failure, there is one place after calling
> tegra_i2c_init() where the clock will not be disabled on failure. Correct
> the error path so that the 'div_clk' is disabled if calling
> tegra_i2c_init() fails.
>
> Fixes: 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210")
>
> Signed-off-by: Jon Hunter <[email protected]>
> ---
> drivers/i2c/busses/i2c-tegra.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 445398c314a3..b126dbaa47e3 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -912,7 +912,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
> ret = tegra_i2c_init(i2c_dev);
> if (ret) {
> dev_err(&pdev->dev, "Failed to initialize i2c controller");
> - goto unprepare_div_clk;
> + goto disable_div_clk;
> }
>
> ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
Any feedback on this?
Jon
--
nvpublic
