[PATCH 08/27] ARM: dts: omap3-devkit8000: remove unneeded unit names

[Javier Martinez Canillas]

This patch fixes the following DTC warnings for omap3-devkit8000.dtb,
omap3-devkit8000-lcd43.dtb and omap3-devkit8000-lcd70.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---

 arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi 
b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index b1b8ebf90c1c..586010179752 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -68,7 +68,7 @@
                };
        };
 
-       tfp410: encoder@0 {
+       tfp410: encoder0 {
                compatible = "ti,tfp410";
                powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
 
@@ -79,7 +79,7 @@
                        port@0 {
                                reg = <0>;
 
-                               tfp410_in: endpoint@0 {
+                               tfp410_in: endpoint {
                                        remote-endpoint = <&dpi_dvi_out>;
                                };
                        };
@@ -87,14 +87,14 @@
                        port@1 {
                                reg = <1>;
 
-                               tfp410_out: endpoint@0 {
+                               tfp410_out: endpoint {
                                        remote-endpoint = <&dvi_connector_in>;
                                };
                        };
                };
        };
 
-       dvi0: connector@0 {
+       dvi0: connector0 {
                compatible = "dvi-connector";
                label = "dvi";
 
@@ -109,7 +109,7 @@
                };
        };
 
-       tv0: connector@1 {
+       tv0: connector1 {
                compatible = "svideo-connector";
                label = "tv";
 
@@ -352,7 +352,7 @@
        vdda_dac-supply = <&vdac>;
 
        port {
-               dpi_dvi_out: endpoint@0 {
+               dpi_dvi_out: endpoint {
                        remote-endpoint = <&tfp410_in>;
                        data-lines = <24>;
                };
-- 
2.5.5