From: Niklas Cassel <niklas.cas...@axis.com>
- Increase config size. When using a PCIe switch,
the previous config size only had room for one device.
- Add bus range. Inherited optional property.
- Map downstream I/O to PCI address 0. We can map it to any
address, but let's be consistent with other drivers.
Signed-off-by: Niklas Cassel <niklas.cas...@axis.com>
---
Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
index 330a45b..5ecaea1 100644
--- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -24,16 +24,17 @@ Example:
compatible = "axis,artpec6-pcie", "snps,dw-pcie";
reg = <0xf8050000 0x2000
0xf8040000 0x1000
- 0xc0000000 0x1000>;
+ 0xc0000000 0x2000>;
reg-names = "dbi", "phy", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* downstream I/O */
- ranges = <0x81000000 0 0x00010000 0xc0010000 0 0x00010000
+ ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
/* non-prefetchable memory */
- 0x82000000 0 0xc0020000 0xc0020000 0 0x1ffe0000>;
+ 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
num-lanes = <2>;
+ bus-range = <0x00 0xff>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
--
2.1.4
