The code that fills packed command header assumes that CPU runs in little-endian mode. Hence the header is malformed in big-endian mode and causes MMC data transfer errors:
[ 563.200828] mmcblk0: error -110 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc40 [ 563.219647] mmcblk0: packed cmd failed, nr 2, sectors 16, failure index: -1 Convert header data to LE. Signed-off-by: Taras Kondratiuk <[email protected]> --- The patch is based on v4.7-rc7. Tested on v4.4 kernel, but this code was not changed since then. drivers/mmc/card/block.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index e62fde3ac431..3832234d9aef 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1786,8 +1786,8 @@ static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq, packed_cmd_hdr = packed->cmd_hdr; memset(packed_cmd_hdr, 0, sizeof(packed->cmd_hdr)); - packed_cmd_hdr[0] = (packed->nr_entries << 16) | - (PACKED_CMD_WR << 8) | PACKED_CMD_VER; + packed_cmd_hdr[0] = cpu_to_le32((packed->nr_entries << 16) | + (PACKED_CMD_WR << 8) | PACKED_CMD_VER); hdr_blocks = mmc_large_sector(card) ? 8 : 1; /* @@ -1801,14 +1801,14 @@ static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq, ((brq->data.blocks * brq->data.blksz) >= card->ext_csd.data_tag_unit_size); /* Argument of CMD23 */ - packed_cmd_hdr[(i * 2)] = + packed_cmd_hdr[(i * 2)] = cpu_to_le32( (do_rel_wr ? MMC_CMD23_ARG_REL_WR : 0) | (do_data_tag ? MMC_CMD23_ARG_TAG_REQ : 0) | - blk_rq_sectors(prq); + blk_rq_sectors(prq)); /* Argument of CMD18 or CMD25 */ - packed_cmd_hdr[((i * 2)) + 1] = + packed_cmd_hdr[((i * 2)) + 1] = cpu_to_le32( mmc_card_blockaddr(card) ? - blk_rq_pos(prq) : blk_rq_pos(prq) << 9; + blk_rq_pos(prq) : blk_rq_pos(prq) << 9); packed->blocks += blk_rq_sectors(prq); i++; } -- 2.5.0
