On Wed, 8 Nov 2000, Keith Owens wrote:
> On Tue, 7 Nov 2000 17:31:19 -0500 (EST),
> "Richard B. Johnson" <[EMAIL PROTECTED]> wrote:
> >Also, I get some CPU watchdog timeout that I didn't ask for Grrr...
> >
> >Nov 7 17:17:54 chaos nmbd[115]: Samba server CHAOS is now a domain master
>browser for workgroup LINUX on subnet 204.178.40.224
> >Nov 7 17:17:54 chaos nmbd[115]:
> >Nov 7 17:17:54 chaos nmbd[115]: *****
> >Nov 7 17:18:54 chaos kernel: NMI Watchdog detected LOCKUP on CPU0,
registers:
> >Nov 7 17:18:54 chaos kernel: CPU: 0
> >Nov 7 17:19:01 chaos login: ROOT LOGIN ON tty2
>
> Which means that one of the cpus is spinning for 5 seconds with
> interrupts disabled. CPU watchdogs are *good*.
>
Well no. I won't buy that. What it means is that some so-called
watchdog timer code is broken.
The following, tight loop user-mode code will trip it off and the
interrupts are not disabled from user-mode code:
#include <stdio.h>
int main(void);
int main()
{
for(;;)
{
__asm__ __volatile__(
"\tpushl %ecx\n"
"\txorl %ecx,%ecx\n"
"1:\tloop 1b\n"
"\tpopl %ecx\n"
);
}
return 0;
}
When it trips off, this code is seg-faulted without any core-dump.
This code must never seg-fault. It doesn't access memory that was
not allocated upon startup and, if the kernel wants the CPU, it
will take it away. It is, after all , supposed to be premptive.
Somebody has severly broken Linux.
> >
> > CPU0 CPU1
> > 0: 10945 11869 IO-APIC-edge timer
> > 1: 419 393 IO-APIC-edge keyboard
> > 2: 0 0 XT-PIC cascade
> > 8: 0 0 IO-APIC-edge rtc
> > 10: 2990 2904 IO-APIC-level eth0
> > 11: 1066 1124 IO-APIC-level BusLogic BT-958
> > 13: 0 0 XT-PIC fpu
> >NMI: 22748 22748
> >LOC: 21731 22229
> >ERR: 0
> >
> >
> >The NMI and LOC (timers) run faster than timer channel 0. This
> >cannot be correct. Anybody know what this is and how to get
> >rid of these CPU time stealers?
>
> The timer is directed both as a normal interrupt 0 and as a broadcast
> non maskable interrupt. The NMI count on each cpu should be roughly
> the sum of the interrupt 0 count across all cpus.
>
How do I get these things turned OFF? These CPUs and this machine
worked fine for two years. It now runs at 1/4 the speed.
> The NMI path is fairly fast so the overhead is small. When it does
> trip you have a problem, a cpu is spinning for far too long. Extract
> the NMI report from the log, run it through ksymoops and mail the
> decoded result.
>
I sincerely doubt that the overhead is small. The overhead is
enormous. It can be felt!
All I got from the log was what was reported. There is a colon
after 'registers' and that's that. The system continued to run.
It did not panic.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.0 on an i686 machine (799.54 BogoMips).
"Memory is like gasoline. You use it up when you are running. Of
course you get it all back when you reboot..."; Actual explanation
obtained from the Micro$oft help desk.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
