From: Pawel Grudzinski <pgrudzin...@openmailbox.org>

Driver fails to load when there is no external Vref regulator defined,
leaving no way to use internal reference. ad5380_probe function tries to
obtain regulator with demv_regulator_get and checks for error, in which
case it would use internal reference. Even without "Vref" regulator defined
devm_regulator_get returns dummy regulator which makes function omit use of
internal reference and causes failure on regulator_get_voltage.

Replace demv_regulator_get with demv_regulator_get_optional, which returns
error instead of dummy regulator if it does not find one which is specified
by the caller to make ad5380_probe configure internal reference when no
"Vref" regulator is supplied.

Initialize internal regulator only if returned error is ENODEV, otherwise
propagate the error to the caller of probe.

Signed-off-by: Paweł Grudziński <pgrudzin...@openmailbox.org>
---
Changes in v2:
- Add error type checking to enable internal reference only on ENODEV and
return any other error to the caller.

 drivers/iio/dac/ad5380.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/dac/ad5380.c b/drivers/iio/dac/ad5380.c
index 97d2c51..144cfdc 100644
--- a/drivers/iio/dac/ad5380.c
+++ b/drivers/iio/dac/ad5380.c
@@ -401,7 +401,7 @@ static int ad5380_probe(struct device *dev, struct regmap 
*regmap,
        if (st->chip_info->int_vref == 2500)
                ctrl |= AD5380_CTRL_INT_VREF_2V5;
 
-       st->vref_reg = devm_regulator_get(dev, "vref");
+       st->vref_reg = devm_regulator_get_optional(dev, "vref");
        if (!IS_ERR(st->vref_reg)) {
                ret = regulator_enable(st->vref_reg);
                if (ret) {
@@ -416,8 +416,13 @@ static int ad5380_probe(struct device *dev, struct regmap 
*regmap,
 
                st->vref = ret / 1000;
        } else {
-               st->vref = st->chip_info->int_vref;
-               ctrl |= AD5380_CTRL_INT_VREF_EN;
+               if (PTR_ERR(st->vref_reg) == -ENODEV) {
+                       st->vref = st->chip_info->int_vref;
+                       ctrl |= AD5380_CTRL_INT_VREF_EN;
+               } else {
+                       ret = st->vref_reg;
+                       goto error_free_reg;
+               }
        }
 
        ret = regmap_write(st->regmap, AD5380_REG_SF_CTRL, ctrl);
-- 
2.8.0

Reply via email to