Parse the optional v4l2 endpoint DT node. If the V4L2_MBUS_NEWAVMODE
parallel bus flag is set, configure the BT.656 bus in NEWAVMODE.
Signed-off-by: Steve Longerbeam <steve_longerb...@mentor.com>
---
drivers/media/i2c/adv7180.c | 47 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 44 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index cb83ebb..667931e9 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -31,6 +31,7 @@
#include <media/v4l2-event.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
#include <linux/mutex.h>
#include <linux/delay.h>
@@ -106,6 +107,7 @@
#define ADV7180_REG_SHAP_FILTER_CTL_1 0x0017
#define ADV7180_REG_CTRL_2 0x001d
#define ADV7180_REG_VSYNC_FIELD_CTL_1 0x0031
+#define ADV7180_VSYNC_FIELD_CTL_1_NEWAVMODE 0x02
#define ADV7180_REG_MANUAL_WIN_CTL_1 0x003d
#define ADV7180_REG_MANUAL_WIN_CTL_2 0x003e
#define ADV7180_REG_MANUAL_WIN_CTL_3 0x003f
@@ -214,6 +216,7 @@ struct adv7180_state {
struct mutex mutex; /* mutual excl. when accessing chip */
int irq;
v4l2_std_id curr_norm;
+ bool newavmode;
bool powered;
bool streaming;
u8 input;
@@ -740,6 +743,8 @@ static int adv7180_g_mbus_config(struct v4l2_subdev *sd,
*/
cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
V4L2_MBUS_DATA_ACTIVE_HIGH;
+ if (state->newavmode)
+ cfg->flags |= V4L2_MBUS_NEWAVMODE;
cfg->type = V4L2_MBUS_BT656;
}
@@ -864,9 +869,15 @@ static int adv7180_init(struct adv7180_state *state)
if (ret < 0)
return ret;
- /* Manually set V bit end position in NTSC mode */
- return adv7180_write(state, ADV7180_REG_NTSC_V_BIT_END,
- ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+ if (!state->newavmode) {
+ /* Manually set V bit end position in NTSC mode */
+ ret = adv7180_write(state, ADV7180_REG_NTSC_V_BIT_END,
+ ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
}
static int adv7180_set_std(struct adv7180_state *state, unsigned int std)
@@ -1217,6 +1228,13 @@ static int init_device(struct adv7180_state *state)
if (ret)
goto out_unlock;
+ if (state->newavmode) {
+ ret = adv7180_write(state, ADV7180_REG_VSYNC_FIELD_CTL_1,
+ ADV7180_VSYNC_FIELD_CTL_1_NEWAVMODE);
+ if (ret < 0)
+ goto out_unlock;
+ }
+
ret = adv7180_program_std(state);
if (ret)
goto out_unlock;
@@ -1257,6 +1275,27 @@ out_unlock:
return ret;
}
+static void adv7180_of_parse(struct adv7180_state *state)
+{
+ struct i2c_client *client = state->client;
+ struct device_node *np = client->dev.of_node;
+ struct device_node *endpoint;
+ struct v4l2_of_endpoint ep;
+
+ endpoint = of_graph_get_next_endpoint(np, NULL);
+ if (!endpoint) {
+ v4l_warn(client, "endpoint node not found\n");
+ return;
+ }
+
+ v4l2_of_parse_endpoint(endpoint, &ep);
+ of_node_put(endpoint);
+
+ if (ep.bus_type == V4L2_MBUS_BT656 &&
+ ep.bus.parallel.flags & V4L2_MBUS_NEWAVMODE)
+ state->newavmode = true;
+}
+
static int adv7180_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1279,6 +1318,8 @@ static int adv7180_probe(struct i2c_client *client,
state->field = V4L2_FIELD_INTERLACED;
state->chip_info = (struct adv7180_chip_info *)id->driver_data;
+ adv7180_of_parse(state);
+
if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
state->csi_client = i2c_new_dummy(client->adapter,
ADV7180_DEFAULT_CSI_I2C_ADDR);
--
1.9.1
