Signed-off-by: Rich Felker <dal...@libc.org>
---
.../bindings/interrupt-controller/jcore,aic.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644
Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
diff --git
a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
new file mode 100644
index 0000000..b7a56ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
@@ -0,0 +1,26 @@
+J-Core Advanced Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
+ with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
+ the "aic2" core with 64 interrupts.
+
+- reg: Memory region(s) for configuration. For SMP, there should be one
+ region per cpu, indexed by the sequential, zero-based hardware cpu
+ number (which is also the logical cpu number).
+
+- interrupt-controller: Identifies the node as an interrupt controller
+
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+
+Example:
+
+aic: interrupt-controller@200 {
+ compatible = "jcore,aic2";
+ reg = < 0x200 0x30 0x500 0x30 >;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};
--
2.8.1
