From: Patrice Chotard <[email protected]> This patch allows to use second parameter to the gpio specifier, which is used to specify whether the gpio is active high or low.
Signed-off-by: Patrice Chotard <[email protected]> --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 52 +++++++++++++++++----------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index a538ae5..5653840 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -58,7 +58,7 @@ pio0: gpio@09610000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x100>; @@ -66,7 +66,7 @@ }; pio1: gpio@09611000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x100>; @@ -74,7 +74,7 @@ }; pio2: gpio@09612000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x100>; @@ -82,7 +82,7 @@ }; pio3: gpio@09613000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x100>; @@ -90,7 +90,7 @@ }; pio4: gpio@09614000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x100>; @@ -99,7 +99,7 @@ pio5: gpio@09615000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x100>; @@ -373,7 +373,7 @@ pio10: pio@09200000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x100>; @@ -381,7 +381,7 @@ }; pio11: pio@09201000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x100>; @@ -389,7 +389,7 @@ }; pio12: pio@09202000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x100>; @@ -397,7 +397,7 @@ }; pio13: pio@09203000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x100>; @@ -405,7 +405,7 @@ }; pio14: pio@09204000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x100>; @@ -413,7 +413,7 @@ }; pio15: pio@09205000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x100>; @@ -421,7 +421,7 @@ }; pio16: pio@09206000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x6000 0x100>; @@ -429,7 +429,7 @@ }; pio17: pio@09207000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x7000 0x100>; @@ -437,7 +437,7 @@ }; pio18: pio@09208000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x8000 0x100>; @@ -445,7 +445,7 @@ }; pio19: pio@09209000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x9000 0x100>; @@ -930,7 +930,7 @@ pio20: pio@09210000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x100>; @@ -951,7 +951,7 @@ pio30: gpio@09220000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x100>; @@ -959,7 +959,7 @@ }; pio31: gpio@09221000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x100>; @@ -967,7 +967,7 @@ }; pio32: gpio@09222000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x100>; @@ -975,7 +975,7 @@ }; pio33: gpio@09223000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x100>; @@ -983,7 +983,7 @@ }; pio34: gpio@09224000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x100>; @@ -991,7 +991,7 @@ }; pio35: gpio@09225000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x100>; @@ -1090,7 +1090,7 @@ pio40: gpio@09230000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0 0x100>; @@ -1098,7 +1098,7 @@ }; pio41: gpio@09231000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x100>; @@ -1106,7 +1106,7 @@ }; pio42: gpio@09232000 { gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x100>; -- 1.9.1
