Currently irqflags is implemented using the PSR's I bit. It is possible to implement irqflags by using the co-processor interface to the GIC. Using the co-processor interface makes it feasible to simulate NMIs using GIC interrupt prioritization.
This patch changes the irqflags macros to modify, save and restore ICC_PMR_EL1. This has a substantial knock on effect for the rest of the kernel. There are four reasons for this: 1. The state of the ICC_PMR_EL1_G_BIT becomes part of the CPU context and must be saved and restored during traps. To simplify the additional context management the ICC_PMR_EL1_G_BIT is converted into a fake (reserved) bit within the PSR (PSR_G_BIT). Naturally this approach will need to be changed if future ARM architecture extensions make use of this bit. 2. The hardware automatically masks the I bit (at boot, during traps, etc). When the I bit is set by hardware we must add code to switch from I bit masking and PMR masking. 3. Some instructions, noteably wfi, require that the PMR not be used for interrupt masking. Before calling these instructions we must switch from PMR masking to I bit masking. 4. We use the alternatives system to all a single kernel to boot and switch between the different masking approaches. Signed-off-by: Daniel Thompson <[email protected]> --- arch/arm64/Kconfig | 15 +++++ arch/arm64/include/asm/arch_gicv3.h | 51 +++++++++++++++++ arch/arm64/include/asm/assembler.h | 32 ++++++++++- arch/arm64/include/asm/irqflags.h | 106 ++++++++++++++++++++++++++++++++++++ arch/arm64/include/asm/ptrace.h | 23 ++++++++ arch/arm64/kernel/entry.S | 77 ++++++++++++++++++++++---- arch/arm64/kernel/head.S | 35 ++++++++++++ arch/arm64/kernel/smp.c | 6 ++ arch/arm64/mm/proc.S | 23 ++++++++ drivers/irqchip/irq-gic-v3.c | 2 + include/linux/irqchip/arm-gic.h | 2 +- 11 files changed, 356 insertions(+), 16 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index bc3f00f586f1..56846724d2af 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -718,6 +718,21 @@ config FORCE_MAX_ZONEORDER However for 4K, we choose a higher default value, 11 as opposed to 10, giving us 4M allocations matching the default size used by generic code. +config USE_ICC_SYSREGS_FOR_IRQFLAGS + bool "Use ICC system registers for IRQ masking" + select CONFIG_ARM_GIC_V3 + help + Using the ICC system registers for IRQ masking makes it possible + to simulate NMI on ARM64 systems. This allows several interesting + features (especially debug features) to be used on these systems. + + Say Y here to implement IRQ masking using ICC system + registers. This will result in an unbootable kernel if these + registers are not implemented or made inaccessible by the + EL3 firmare or EL2 hypervisor (if present). + + If unsure, say N + menuconfig ARMV8_DEPRECATED bool "Emulate deprecated/obsolete ARMv8 instructions" depends on COMPAT diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index fc2a0cb47b2c..a4ad69e2831b 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -80,6 +80,9 @@ #include <linux/stringify.h> #include <asm/barrier.h> +/* Our default, arbitrary priority value. Linux only uses one anyway. */ +#define DEFAULT_PMR_VALUE 0xf0 + /* * Low-level accessors * @@ -102,9 +105,35 @@ static inline void gic_write_dir(u32 irq) static inline u64 gic_read_iar_common(void) { u64 irqstat; + u64 __maybe_unused daif; + u64 __maybe_unused pmr; + u64 __maybe_unused default_pmr_value = DEFAULT_PMR_VALUE; +#ifndef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS asm volatile("mrs_s %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat)); dsb(sy); +#else + /* + * The PMR may be configured to mask interrupts when this code is + * called, thus in order to acknowledge interrupts we must set the + * PMR to its default value before reading from the IAR. + * + * To do this without taking an interrupt we also ensure the I bit + * is set whilst we are interfering with the value of the PMR. + */ + asm volatile( + "mrs %1, daif\n\t" /* save I bit */ + "msr daifset, #2\n\t" /* set I bit */ + "mrs_s %2, " __stringify(ICC_PMR_EL1) "\n\t"/* save PMR */ + "msr_s " __stringify(ICC_PMR_EL1) ",%3\n\t" /* set PMR */ + "mrs_s %0, " __stringify(ICC_IAR1_EL1) "\n\t" /* ack int */ + "msr_s " __stringify(ICC_PMR_EL1) ",%2\n\t" /* restore PMR */ + "isb\n\t" + "msr daif, %1" /* restore I */ + : "=r" (irqstat), "=&r" (daif), "=&r" (pmr) + : "r" (default_pmr_value)); +#endif + return irqstat; } @@ -118,7 +147,11 @@ static inline u64 gic_read_iar_common(void) static inline u64 gic_read_iar_cavium_thunderx(void) { u64 irqstat; + u64 __maybe_unused daif; + u64 __maybe_unused pmr; + u64 __maybe_unused default_pmr_value = DEFAULT_PMR_VALUE; +#ifndef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS asm volatile( "nop;nop;nop;nop\n\t" "nop;nop;nop;nop\n\t" @@ -126,6 +159,24 @@ static inline u64 gic_read_iar_cavium_thunderx(void) "nop;nop;nop;nop" : "=r" (irqstat)); mb(); +#else + /* Refer to comment in gic_read_iar_common() for more details */ + asm volatile( + "mrs %1, daif\n\t" /* save I bit */ + "msr daifset, #2\n\t" /* set I bit */ + "mrs_s %2, " __stringify(ICC_PMR_EL1) "\n\t"/* save PMR */ + "msr_s " __stringify(ICC_PMR_EL1) ",%3\n\t" /* set PMR */ + "nop;nop;nop;nop\n\t" + "nop;nop;nop;nop\n\t" + "mrs_s %0, " __stringify(ICC_IAR1_EL1) "\n\t" /* ack int */ + "nop;nop;nop;nop\n\t" + "msr_s " __stringify(ICC_PMR_EL1) ",%2\n\t" /* restore PMR */ + "isb\n\t" + "msr daif, %1" /* restore I */ + : "=r" (irqstat), "=&r" (daif), "=&r" (pmr) + : "r" (default_pmr_value)); + +#endif return irqstat; } diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index d5025c69ca81..0adea5807ef0 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -23,6 +23,8 @@ #ifndef __ASM_ASSEMBLER_H #define __ASM_ASSEMBLER_H +#include <asm/alternative.h> +#include <asm/arch_gicv3.h> #include <asm/asm-offsets.h> #include <asm/cpufeature.h> #include <asm/page.h> @@ -33,12 +35,30 @@ /* * Enable and disable interrupts. */ - .macro disable_irq + .macro disable_irq, tmp +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS + mov \tmp, #ICC_PMR_EL1_MASKED +alternative_if_not ARM64_HAS_SYSREG_GIC_CPUIF msr daifset, #2 +alternative_else + msr_s ICC_PMR_EL1, \tmp +alternative_endif +#else + msr daifset, #2 +#endif .endm - .macro enable_irq + .macro enable_irq, tmp +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS + mov \tmp, #ICC_PMR_EL1_UNMASKED +alternative_if_not ARM64_HAS_SYSREG_GIC_CPUIF msr daifclr, #2 +alternative_else + msr_s ICC_PMR_EL1, \tmp +alternative_endif +#else + msr daifclr, #2 +#endif .endm /* @@ -70,13 +90,19 @@ 9990: .endm + /* * Enable both debug exceptions and interrupts. This is likely to be * faster than two daifclr operations, since writes to this register * are self-synchronising. */ - .macro enable_dbg_and_irq + .macro enable_dbg_and_irq, tmp +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS + enable_dbg + enable_irq \tmp +#else msr daifclr, #(8 | 2) +#endif .endm /* diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h index f367cbd92ff0..b14ee24bc3a7 100644 --- a/arch/arm64/include/asm/irqflags.h +++ b/arch/arm64/include/asm/irqflags.h @@ -18,8 +18,13 @@ #ifdef __KERNEL__ +#include <asm/alternative.h> +#include <asm/arch_gicv3.h> +#include <asm/cpufeature.h> #include <asm/ptrace.h> +#ifndef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS + /* * CPU interrupt mask handling. */ @@ -84,6 +89,107 @@ static inline int arch_irqs_disabled_flags(unsigned long flags) return flags & PSR_I_BIT; } +static inline void maybe_switch_to_sysreg_gic_cpuif(void) {} + +#else /* CONFIG_IRQFLAGS_GIC_MASKING */ + +/* + * CPU interrupt mask handling. + */ +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags, masked = ICC_PMR_EL1_MASKED; + + asm volatile(ALTERNATIVE( + "mrs %0, daif // arch_local_irq_save\n" + "msr daifset, #2", + /* --- */ + "mrs_s %0, " __stringify(ICC_PMR_EL1) "\n" + "msr_s " __stringify(ICC_PMR_EL1) ",%1", + ARM64_HAS_SYSREG_GIC_CPUIF) + : "=&r" (flags) + : "r" (masked) + : "memory"); + + return flags; +} + +static inline void arch_local_irq_enable(void) +{ + unsigned long unmasked = ICC_PMR_EL1_UNMASKED; + + asm volatile(ALTERNATIVE( + "msr daifclr, #2 // arch_local_irq_enable", + "msr_s " __stringify(ICC_PMR_EL1) ",%0", + ARM64_HAS_SYSREG_GIC_CPUIF) + : + : "r" (unmasked) + : "memory"); +} + +static inline void arch_local_irq_disable(void) +{ + unsigned long masked = ICC_PMR_EL1_MASKED; + + asm volatile(ALTERNATIVE( + "msr daifset, #2 // arch_local_irq_disable", + "msr_s " __stringify(ICC_PMR_EL1) ",%0", + ARM64_HAS_SYSREG_GIC_CPUIF) + : + : "r" (masked) + : "memory"); +} + +/* + * Save the current interrupt enable state. + */ +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + + asm volatile(ALTERNATIVE( + "mrs %0, daif // arch_local_save_flags", + "mrs_s %0, " __stringify(ICC_PMR_EL1), + ARM64_HAS_SYSREG_GIC_CPUIF) + : "=r" (flags) + : + : "memory"); + + return flags; +} + +/* + * restore saved IRQ state + */ +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile(ALTERNATIVE( + "msr daif, %0 // arch_local_irq_restore", + "msr_s " __stringify(ICC_PMR_EL1) ",%0", + ARM64_HAS_SYSREG_GIC_CPUIF) + : + : "r" (flags) + : "memory"); +} + +static inline int arch_irqs_disabled_flags(unsigned long flags) +{ + asm volatile(ALTERNATIVE( + "and %0, %0, #" __stringify(PSR_I_BIT) "\n" + "nop", + /* --- */ + "and %0, %0, # " __stringify(ICC_PMR_EL1_G_BIT) "\n" + "eor %0, %0, # " __stringify(ICC_PMR_EL1_G_BIT), + ARM64_HAS_SYSREG_GIC_CPUIF) + : "+r" (flags)); + + return flags; +} + +void maybe_switch_to_sysreg_gic_cpuif(void); + +#endif /* CONFIG_IRQFLAGS_GIC_MASKING */ + #define local_fiq_enable() asm("msr daifclr, #1" : : : "memory") #define local_fiq_disable() asm("msr daifset, #1" : : : "memory") diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index ada08b5b036d..24154d6228d7 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -25,6 +25,24 @@ #define CurrentEL_EL1 (1 << 2) #define CurrentEL_EL2 (2 << 2) +/* PMR values used to mask/unmask interrupts */ +#define ICC_PMR_EL1_G_SHIFT 6 +#define ICC_PMR_EL1_G_BIT (1 << ICC_PMR_EL1_G_SHIFT) +#define ICC_PMR_EL1_UNMASKED 0xf0 +#define ICC_PMR_EL1_MASKED (ICC_PMR_EL1_UNMASKED ^ ICC_PMR_EL1_G_BIT) + +/* + * This is the GIC interrupt mask bit. It is not actually part of the + * PSR and so does not appear in the user API, we are simply using some + * reserved bits in the PSR to store some state from the interrupt + * controller. The context save/restore functions will extract the + * ICC_PMR_EL1_G_BIT and save it as the PSR_G_BIT. + */ +#define PSR_G_BIT 0x00400000 +#define PSR_G_SHIFT 22 +#define PSR_G_PMR_G_SHIFT (PSR_G_SHIFT - ICC_PMR_EL1_G_SHIFT) +#define PSR_I_PMR_G_SHIFT (7 - ICC_PMR_EL1_G_SHIFT) + /* AArch32-specific ptrace requests */ #define COMPAT_PTRACE_GETREGS 12 #define COMPAT_PTRACE_SETREGS 13 @@ -142,8 +160,13 @@ struct pt_regs { #define processor_mode(regs) \ ((regs)->pstate & PSR_MODE_MASK) +#ifndef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS #define interrupts_enabled(regs) \ (!((regs)->pstate & PSR_I_BIT)) +#else +#define interrupts_enabled(regs) \ + ((!((regs)->pstate & PSR_I_BIT)) && (!((regs)->pstate & PSR_G_BIT))) +#endif #define fast_interrupts_enabled(regs) \ (!((regs)->pstate & PSR_F_BIT)) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 441420ca7d08..1712b344cbf3 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/linkage.h> +#include <linux/irqchip/arm-gic-v3.h> #include <asm/alternative.h> #include <asm/assembler.h> @@ -108,6 +109,26 @@ .endif /* \el == 0 */ mrs x22, elr_el1 mrs x23, spsr_el1 +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS + /* + * Save the context held in the PMR register and copy the current + * I bit state to the PMR. Re-enable of the I bit happens in later + * code that knows what type of trap we are handling. + */ +alternative_if_not ARM64_HAS_SYSREG_GIC_CPUIF + b 1f +alternative_else + mrs_s x20, ICC_PMR_EL1 // Get PMR +alternative_endif + and x20, x20, #ICC_PMR_EL1_G_BIT // Extract mask bit + lsl x20, x20, #PSR_G_PMR_G_SHIFT // Shift to a PSTATE RES0 bit + eor x20, x20, #PSR_G_BIT // Invert bit + orr x23, x20, x23 // Store PMR within PSTATE + mov x20, #ICC_PMR_EL1_MASKED + msr_s ICC_PMR_EL1, x20 // Mask normal interrupts at PMR +1: +#endif + stp lr, x21, [sp, #S_LR] stp x22, x23, [sp, #S_PC] @@ -168,6 +189,22 @@ alternative_else alternative_endif #endif .endif +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS + /* + * Restore the context to the PMR (and ensure the reserved bit is + * restored to zero before being copied back to the PSR). + */ +alternative_if_not ARM64_HAS_SYSREG_GIC_CPUIF + b 1f +alternative_else + and x20, x22, #PSR_G_BIT // Get stolen PSTATE bit +alternative_endif + and x22, x22, #~PSR_G_BIT // Clear stolen bit + lsr x20, x20, #PSR_G_PMR_G_SHIFT // Shift back to PMR mask + eor x20, x20, #ICC_PMR_EL1_UNMASKED // x20 gets 0xf0 or 0xb0 + msr_s ICC_PMR_EL1, x20 // Write to PMR +1: +#endif msr elr_el1, x21 // set up the return data msr spsr_el1, x22 ldp x0, x1, [sp, #16 * 0] @@ -378,14 +415,30 @@ el1_da: mrs x0, far_el1 enable_dbg // re-enable interrupts if they were enabled in the aborted context +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS +alternative_if_not ARM64_HAS_SYSREG_GIC_CPUIF tbnz x23, #7, 1f // PSR_I_BIT - enable_irq + nop + nop + msr daifclr, #2 +1: +alternative_else + tbnz x23, #PSR_G_SHIFT, 1f // PSR_G_BIT + mov x2, #ICC_PMR_EL1_UNMASKED + msr_s ICC_PMR_EL1, x2 + msr daifclr, #2 1: +alternative_endif +#else + tbnz x23, #7, 1f // PSR_I_BIT + enable_irq x2 +1: +#endif mov x2, sp // struct pt_regs bl do_mem_abort // disable interrupts before pulling preserved data off the stack - disable_irq + disable_irq x21 kernel_exit 1 el1_sp_pc: /* @@ -539,7 +592,7 @@ el0_da: */ mrs x26, far_el1 // enable interrupts before calling the main handler - enable_dbg_and_irq + enable_dbg_and_irq x0 ct_user_exit bic x0, x26, #(0xff << 56) mov x1, x25 @@ -552,7 +605,7 @@ el0_ia: */ mrs x26, far_el1 // enable interrupts before calling the main handler - enable_dbg_and_irq + enable_dbg_and_irq x0 ct_user_exit mov x0, x26 mov x1, x25 @@ -585,7 +638,7 @@ el0_sp_pc: */ mrs x26, far_el1 // enable interrupts before calling the main handler - enable_dbg_and_irq + enable_dbg_and_irq x0 ct_user_exit mov x0, x26 mov x1, x25 @@ -597,7 +650,7 @@ el0_undef: * Undefined instruction */ // enable interrupts before calling the main handler - enable_dbg_and_irq + enable_dbg_and_irq x0 ct_user_exit mov x0, sp bl do_undefinstr @@ -606,7 +659,7 @@ el0_sys: /* * System instructions, for trapped cache maintenance instructions */ - enable_dbg_and_irq + enable_dbg_and_irq x0 ct_user_exit mov x0, x25 mov x1, sp @@ -690,7 +743,7 @@ ENDPROC(cpu_switch_to) * and this includes saving x0 back into the kernel stack. */ ret_fast_syscall: - disable_irq // disable interrupts + disable_irq x21 // disable interrupts str x0, [sp, #S_X0] // returned x0 ldr x1, [tsk, #TI_FLAGS] // re-check for syscall tracing and x2, x1, #_TIF_SYSCALL_WORK @@ -700,7 +753,7 @@ ret_fast_syscall: enable_step_tsk x1, x2 kernel_exit 0 ret_fast_syscall_trace: - enable_irq // enable interrupts + enable_irq x0 // enable interrupts b __sys_trace_return_skipped // we already saved x0 /* @@ -710,7 +763,7 @@ work_pending: tbnz x1, #TIF_NEED_RESCHED, work_resched /* TIF_SIGPENDING, TIF_NOTIFY_RESUME or TIF_FOREIGN_FPSTATE case */ mov x0, sp // 'regs' - enable_irq // enable interrupts for do_notify_resume() + enable_irq x21 // enable interrupts for do_notify_resume() bl do_notify_resume b ret_to_user work_resched: @@ -723,7 +776,7 @@ work_resched: * "slow" syscall return path. */ ret_to_user: - disable_irq // disable interrupts + disable_irq x21 // disable interrupts ldr x1, [tsk, #TI_FLAGS] and x2, x1, #_TIF_WORK_MASK cbnz x2, work_pending @@ -753,7 +806,7 @@ el0_svc: mov sc_nr, #__NR_syscalls el0_svc_naked: // compat entry point stp x0, scno, [sp, #S_ORIG_X0] // save the original x0 and syscall number - enable_dbg_and_irq + enable_dbg_and_irq x16 ct_user_exit 1 ldr x16, [tsk, #TI_FLAGS] // check for syscall hooks diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index b77f58355da1..27f04f03a179 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -620,6 +620,38 @@ set_cpu_boot_mode_flag: ret ENDPROC(set_cpu_boot_mode_flag) +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS +/* + * void maybe_switch_to_sysreg_gic_cpuif(void) + * + * Enable interrupt controller system register access if this feature + * has been detected by the alternatives system. + * + * Before we jump into generic code we must enable interrupt controller system + * register access because this is required by the irqflags macros. We must + * also mask interrupts at the PMR and unmask them within the PSR. That leaves + * us set up and ready for the kernel to make its first call to + * arch_local_irq_enable(). + + * + */ +ENTRY(maybe_switch_to_sysreg_gic_cpuif) +alternative_if_not ARM64_HAS_SYSREG_GIC_CPUIF + b 1f +alternative_else + mrs_s x0, ICC_SRE_EL1 +alternative_endif + orr x0, x0, #1 + msr_s ICC_SRE_EL1, x0 // Set ICC_SRE_EL1.SRE==1 + isb // Make sure SRE is now set + mov x0, ICC_PMR_EL1_MASKED + msr_s ICC_PMR_EL1, x0 // Prepare for unmask of I bit + msr daifclr, #2 // Clear the I bit +1: + ret +ENDPROC(maybe_switch_to_sysreg_gic_cpuif) +#endif + /* * We need to find out the CPU boot mode long after boot, so we need to * store it in a writable variable. @@ -684,6 +716,9 @@ __secondary_switched: mov sp, x0 and x0, x0, #~(THREAD_SIZE - 1) msr sp_el0, x0 // save thread_info +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS + bl maybe_switch_to_sysreg_gic_cpuif +#endif mov x29, #0 b secondary_start_kernel ENDPROC(__secondary_switched) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index c49e8874fba8..2c118b2db7b4 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -448,6 +448,12 @@ void __init smp_prepare_boot_cpu(void) * and/or scheduling is enabled. */ apply_alternatives_early(); + + /* + * Conditionally switch to GIC PMR for interrupt masking (this + * will be a nop if we are using normal interrupt masking) + */ + maybe_switch_to_sysreg_gic_cpuif(); } static u64 __init of_get_cpu_mpidr(struct device_node *dn) diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 5bb61de23201..dba725eece86 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/linkage.h> +#include <linux/irqchip/arm-gic-v3.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/hwcap.h> @@ -47,11 +48,33 @@ * cpu_do_idle() * * Idle the processor (wait for interrupt). + * + * If CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS is set we must do additional + * work to ensure that interrupts are not masked at the PMR (because the + * core will not wake up if we block the wake up signal in the interrupt + * controller). */ ENTRY(cpu_do_idle) +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS +alternative_if_not ARM64_HAS_SYSREG_GIC_CPUIF +#endif + dsb sy // WFI may enter a low-power mode + wfi + ret +#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS +alternative_else + mrs x0, daif // save I bit + msr daifset, #2 // set I bit + mrs_s x1, ICC_PMR_EL1 // save PMR +alternative_endif + mov x2, #ICC_PMR_EL1_UNMASKED + msr_s ICC_PMR_EL1, x2 // unmask at PMR dsb sy // WFI may enter a low-power mode wfi + msr_s ICC_PMR_EL1, x1 // restore PMR + msr daif, x0 // restore I bit ret +#endif ENDPROC(cpu_do_idle) #ifdef CONFIG_CPU_PM diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index fedcdd09b9b2..14b2fb5e81ef 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -492,8 +492,10 @@ static void gic_cpu_sys_reg_init(void) if (!gic_enable_sre()) pr_err("GIC: unable to set SRE (disabled at EL2), panic ahead\n"); +#ifndef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS /* Set priority mask register */ gic_write_pmr(DEFAULT_PMR_VALUE); +#endif /* * Some firmwares hand over to the kernel with the BPR changed from diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h index eafc965b3eb8..ba9ed0a2ac09 100644 --- a/include/linux/irqchip/arm-gic.h +++ b/include/linux/irqchip/arm-gic.h @@ -54,7 +54,7 @@ #define GICD_INT_EN_CLR_X32 0xffffffff #define GICD_INT_EN_SET_SGI 0x0000ffff #define GICD_INT_EN_CLR_PPI 0xffff0000 -#define GICD_INT_DEF_PRI 0xa0 +#define GICD_INT_DEF_PRI 0xc0 #define GICD_INT_DEF_PRI_X4 ((GICD_INT_DEF_PRI << 24) |\ (GICD_INT_DEF_PRI << 16) |\ (GICD_INT_DEF_PRI << 8) |\ -- 2.7.4
