[PATCH] mmc: core: Add error message when switching fails in mmc_select_hs()

[Jungseung Lee]

The switch failure message in mmc_select_timing() had been removed
since that is invalid: commit 0400ed0a083a ("mmc: core: remove the
invalid message in mmc_select_timing")

Now, in the case when mmc_select_hs() return error in mmc_select_timing(),
there is nothing to print failure message.
Let's make for mmc_select_hs() print message itself in the failure case.

Signed-off-by: Jungseung Lee <js07....@samsung.com>
---
 drivers/mmc/core/mmc.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index f2d185c..3486bc7 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1029,6 +1029,10 @@ static int mmc_select_hs(struct mmc_card *card)
                err = mmc_switch_status(card);
        }
 
+       if (err)
+               pr_warn("%s: switch to high-speed failed, err:%d\n",
+                       mmc_hostname(card->host), err);
+
        return err;
 }
 
@@ -1265,11 +1269,8 @@ static int mmc_select_hs400es(struct mmc_card *card)
 
        /* Switch card to HS mode */
        err = mmc_select_hs(card);
-       if (err) {
-               pr_err("%s: switch to high-speed failed, err:%d\n",
-                       mmc_hostname(host), err);
+       if (err)
                goto out_err;
-       }
 
        err = mmc_switch_status(card);
        if (err)
-- 
1.7.9.5