On Fri, 2016-08-12 at 10:41 +0800, Long Cheng wrote:
> From: Eddie Huang <eddie.hu...@mediatek.com>
> 
> mediatek can support baud rate up to 4M.
> the 'uart_get_baud_rate' function will limit the max baud rate.
> Modify max baud to remove the limit.
> 
> Signed-off-by: Long Cheng <long.ch...@mediatek.com>
> ---
>  drivers/tty/serial/8250/8250_mtk.c  |    6 +-----
>  drivers/tty/serial/8250/8250_port.c |    4 +---
>  2 files changed, 2 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_mtk.c 
> b/drivers/tty/serial/8250/8250_mtk.c
> index 3611ec9..ce0cc47 100644
> --- a/drivers/tty/serial/8250/8250_mtk.c
> +++ b/drivers/tty/serial/8250/8250_mtk.c
> @@ -62,7 +62,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios 
> *termios,
>        */
>       baud = uart_get_baud_rate(port, termios, old,
>                                 port->uartclk / 16 / 0xffff,
> -                               port->uartclk / 16);
> +                               port->uartclk);
>  
>       if (baud <= 115200) {
>               serial_port_out(port, UART_MTK_HIGHS, 0x0);
> @@ -76,10 +76,6 @@ mtk8250_set_termios(struct uart_port *port, struct 
> ktermios *termios,
>               quot = DIV_ROUND_UP(port->uartclk, 4 * baud);
>       } else {
>               serial_port_out(port, UART_MTK_HIGHS, 0x3);
> -
> -             /* Set to highest baudrate supported */
> -             if (baud >= 1152000)
> -                     baud = 921600;
>               quot = DIV_ROUND_UP(port->uartclk, 256 * baud);
>       }
>  
> diff --git a/drivers/tty/serial/8250/8250_port.c 
> b/drivers/tty/serial/8250/8250_port.c
> index 7481b95..c45c1e3 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -2504,8 +2504,6 @@ static unsigned int serial8250_get_baud_rate(struct 
> uart_port *port,
>                                            struct ktermios *termios,
>                                            struct ktermios *old)
>  {
> -     unsigned int tolerance = port->uartclk / 100;
> -
>       /*
>        * Ask the core to calculate the divisor for us.
>        * Allow 1% tolerance at the upper limit so uart clks marginally
> @@ -2514,7 +2512,7 @@ static unsigned int serial8250_get_baud_rate(struct 
> uart_port *port,
>        */
>       return uart_get_baud_rate(port, termios, old,
>                                 port->uartclk / 16 / 0xffff,
> -                               (port->uartclk + tolerance) / 16);
> +                               port->uartclk);
>  }
>  
>  void

Ping? Any reaction to the above?

Regards, thanks.

Reply via email to