Hi Chris, On mer., août 24 2016, Chris Packham <[email protected]> wrote:
> Add pin control information for the NAND flash interface. This interface > is multiplexed with the device bus interface to the function is "dev" > not "nand" as one might expect. > > Signed-off-by: Chris Packham <[email protected]> Applied on mvebu/dt Thanks, Gregory > --- > arch/arm/boot/dts/armada-38x.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/armada-38x.dtsi > b/arch/arm/boot/dts/armada-38x.dtsi > index 3312be6c82cc..30381d421d43 100644 > --- a/arch/arm/boot/dts/armada-38x.dtsi > +++ b/arch/arm/boot/dts/armada-38x.dtsi > @@ -287,6 +287,15 @@ > marvell,function = "spi1"; > }; > > + nand_pins: nand-pins { > + marvell,pins = "mpp22", "mpp34", > "mpp23", > + "mpp33", "mpp38", > "mpp28", > + "mpp40", "mpp42", > "mpp35", > + "mpp36", "mpp25", > "mpp30", > + "mpp32"; > + marvell,function = "dev"; > + }; > + > uart0_pins: uart-pins-0 { > marvell,pins = "mpp0", "mpp1"; > marvell,function = "ua0"; > -- > 2.9.2.518.ged577c6.dirty > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
